Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: Ducksnuff870 on April 13, 2013, 01:15:50 pm

Title: 7300 oiler
Post by: Ducksnuff870 on April 13, 2013, 01:15:50 pm

Im new to Dolmar. I picked up a 7300 with 24" bar for $250. It runs good what not. How/where do I turn the oiler up?

Title: Re: 7300 oiler
Post by: Cut4fun on April 13, 2013, 01:26:49 pm

Dolmar 6400 7300 7900 IPL  http://www.barrettsmallengine.com/partslist/dolmarpartslist995700059.pdf

Dolmar 7310 7910 IPL  http://download.dolmar.com/manuals/22348.pdf

Look at bottom of crankcase under clutch area for little hole and screwdriver head with arrow pointing around.

Title: Re: 7300 oiler
Post by: Ducksnuff870 on April 13, 2013, 01:55:55 pm

Thanks

Title: Re: 7300 oiler
Post by: 660magnum on April 13, 2013, 02:21:07 pm

I think it is only "low", "med", & "high"?  three positions?