Chainsaw Repair
Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: dabchick1 on September 12, 2013, 05:28:20 am
-
hello i have bought a neilsen MT-7777 Chainsaw (here in england ) and can not find out what oregon bar and chain will fit it.can anyone please help me.
many thanks Barbara
-
hello and welcome to the forum! :)
what you have is one of the many versions of the same chainsaw. I don't recall the actual manufacturers name, but other than the color, they're all the same. the bar/chain combo's they come with are pretty much the same. they all seem to use .325, but the length differs from 16"-20". unless reach is needed, i'd use a 16" bar/chain on that saw.
this is for a 'gio' branded version. same saw, different color:
a good combo kit for that is pn#108579
here's the link to the American Oregon page:
http://www.oregonproducts.com/pro/products/combos/combo_108579.htm
do you have any small engine or ope dealers around you? they might have something hanging on the wall for you.
-
hello,and thank you so much, could you possibly give me the reference number for an oregon 12" bar and chain so i can order it here online.as i am somewhat curtailed in the traveling department.
many thanks
-
http://www.ebay.com/itm/108579-Oregon-Bar-and-Chain-Combo-Saw-OEM-95VPX066G-160MLBK095-New-/221068581804
http://www.baileysonline.com/Chainsaw-Bars/Bar-Chain---Sprocket-Nose-Consumer/Oregon/Micro-Lite/16-Oregon-108579-Micro-Lite-Chainsaw-Bar-and-Chain-Combo-325-Pitch.axd
-
hello,thank you for your time and trouble, but those references appear to be for a 16" bar and chain, i require a 12" bar and chain,would you know the reference number for these.
many thanks
-
This is just the bar 13" is the shortest they make in .325 pitch and K095 mount. This is narrow kerf 130MPBK095
http://www.baileysonline.com/Chainsaw-Bars/Sprocket-Nose-Consumer/Oregon/Micro-Lite/Oregon-13-Micro-Lite-Pro-Chainsaw-Bar-130MPBK095-56-Drive-Links.axd
Here is the chain
http://www.baileysonline.com/Saw-Chain/Chain-Loops/Narrow-Kerf/325-Pitch---050-Gauge/Oregon-13-Chainsaw-Chain-Loop-95VPX-56-Drive-Links.axd
-
thank you so very very much xxx
-
woops! I didn't realize the saw you were talking about was smaller than the "52cc" version :D
now the question is: does this saw use .325 or 3/8lp? ???
is the saw you have similar to this one?
http://www.amazon.co.uk/Chain-Petrol-300mm-25-4cc-2-Stroke/dp/B008C7RB0K/ref=sr_1_1?s=diy&ie=UTF8&qid=1379020849&sr=1-1&keywords=Neilsen+chainsaw
or this one?
(http://i43.tinypic.com/20ftg90.jpg)
if either one, it'll need the 3/8lp
-
There's a lot more 3/8" Low Profile options out there than .325" in the really short bars.
-
this one http://www.millertools.co.uk/neilsen-12-petrol-chainsaw-with-neilsen-bar--chain-33708-p.asp
below is the reply from supplier.
Hi there and thank you for your email. I know that it is a 325 pitch but not sure about the gauge. I hope this helps.
Kind regards
-
12" bar/chain on a 52cc saw. now i'm thoroughly confused ;D
can you measure the distance center to center between 3 of the rivets on the chain? take 3 of the rivets and measure how far the outer 2 are from one another center to center of the other. that will tell us if it's .325 or 3/8lp.
usually these saws come with a much longer bar and .325 chain. first I've seen with a 12er
we'll get to the bottom of this eventually :)
-
the same 52cc chainsaw with 12" bar http://www.ebay.co.uk/itm/52cc-12-bar-two-stroke-petrol-chainsaw-NEW-next-working-day-delivery-/221238039991
-
12" bar/chain on a 52cc saw. now i'm thoroughly confused ;D
can you measure the distance center to center between 3 of the rivets on the chain? take 3 of the rivets and measure how far the outer 2 are from one another center to center of the other. that will tell us if it's .325 or 3/8lp.
usually these saws come with a much longer bar and .325 chain. first I've seen with a 12er
we'll get to the bottom of this eventually :)
Steve,
The Brits seem to prefer short bars on their home owner saws. You see it a lot if your cruise Ebay.co.uk 12 and 13" very common.
Regards,
Lee