Chainsaw Repair
For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Wanted => Topic started by: Cut4fun . on October 16, 2013, 02:37:28 pm
-
Just putting feelers out for a used but usable large husky mount bar in 3/8 050 preferably. 32" to 42"
Other gages will be considered. Looking for occasional use bar for the big one or gtg cut running full skip chain.
-
Kevin- I got stacks of long Husky mount bars. I'll check and see if any are .050" gauge.
-
Let me know what you find and what your wanting or looking for.
It's just a want, not a need, for that every once a year or 2 use.
-
I found a bunch but they're all .063" gauge. I did find a new/near new Oregon 37" large Husky mount in .063" x 3/8ths. I can send you a picture of it if you'd be interested.
-
Thanks for checking. Also check out Aaron wanted 32" bar thread too.
Going to look for 050 36" 1st, then 42" 063 2nd. Will get back if I cant find anything for my wants.
-
I may have a 32", wish I had known as I could have brought it to Gregg's. Have to be tomorrow before I can check.