Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: ncarr275 on November 20, 2013, 03:15:45 pm
-
Anyone here bought the MS200T cylinder kit from northwood saw? or any recomedations on other kits?
-
There is kits listed in this thread. http://chainsawrepair.createaforum.com/stihl/stihl-020t-ms-200t-case-split/msg26241/#new
-
http://www.hlsproparts.com/Hyway-Stihl-MS200T-cylinder-kit-1129-020-1202-p/h30200.htm
From HLSProParts.com they are members, mention this forum and you get 10% off.
I have used Hyway kits for some time now without problem, the only thing I would recommend is using Caber rings instead of those that come with the kit.
-
I know Jeff aka procarbine has installed a aftermarket 200T P+C to test out before. Has anyone else got any feed back on the aftermarket P+C kits out there for these from the commercial tree guys?
-
It's only a matter of time .I'll find one with a cooked cylinder and give some after market kit a go .It's usually a fried cylinder or a 60 foot fall from a tree that kills them .
-
I was just noticing there was 3 aftermarket stihl 200 cylinder kits offered. Meteor Hyway and no name. http://www.hlsproparts.com/category-s/239.htm
-
Kevin,
I installed a Greek cylinder kit (DLA) with meteor piston in my business partners Dads ms200t and it's still going fine after A few Yeard. Fins on the jug were notably thinner than oem. Rest was nicely done...