Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: Old Iron Logging on May 22, 2011, 11:36:38 am

Title: K095 bar mount
Post by: Old Iron Logging on May 22, 2011, 11:36:38 am

What is the biggest saw to run the K095 mount? Dolmar 120si was 68cc. Anything bigger?

Title: Re: K095 bar mount
Post by: Cut4fun on May 23, 2011, 10:24:57 am

I take you are talking stock oem saws, the way they come from factory.  ;)

Here is a list to look at  A095 / K095 / Z095 / T095.  Any bigger?

Copy and pasted from bar search.

ALPINA/CASTOR    A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P-510, PRO-41, PRO-45, PRO-540, PRO-600   

CUB CADET   CS5018, CS5220, CS5720

DOLMAR   109, 110, 110 EX, 111, 112, 113, 114, 115, 116si, 117, 118, 119, 120, 120si, 120 SUPER, PS-6800

HOMELITE   30, 130, 150, 150 AO, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES

HUSQVARNA   33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 140S, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 339XP, 340, 345, 346, 350, 351, 353, 357XP, 359, 360, 362, 444, 455 Rancher, 1400, 1600

JOHN DEERE    CS46, CS52, CS56, CS62

JONSERED   45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159   

MAKITA    DCS 430, DCS 431, DCS 520i, DCS 5200i, DCS 6000i   

MARUYAMA   POLESAWS: MC-PL11, MC-PS11   

McCULLOCH    1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV, Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20   
MTD   152, 162   

OLEO-MAC    941, 945, 950, 951   

PARTNER    410, 510, 540, P-360, P-400, P-450, P-500, P-5000   P 5500

PIONEER    1074, P-21, P-26, P-28   

POULAN/POULAN PRO    325   

REDMAX    G390, G450AVS, G455AVS, G3800    G5000

RYOBI   RFS4518, RFS5418   

SEARS   35084, 35201   

SOLO    614, 630, 631, 632, 638, 639, 641, 644, 645, 647, 650, 651, 651SP, 654   

TALON   AC310220S, AC3102-55C, AC310218, AC310318, AC3103-42C   

TANAKA   ECV5601

Title: Re: K095 bar mount
Post by: SawTroll on May 24, 2011, 12:01:07 am

Several saws are missing on that list, and I never heard of a Husky 360?   ???

Anyway, I believe the 67cc (not 68cc) Dolmars were the largest ones! :)

Title: Re: K095 bar mount
Post by: Old Iron Logging on May 24, 2011, 08:50:26 am

I was just wondering which saws the longer small tail bars were made for. Must have been the 120-6800 models. I had 24" on a 116si and it was no problem. 120si had good torque.

Title: Re: K095 bar mount
Post by: Cut4fun on May 24, 2011, 10:46:37 am

I had a 24" small mount for my DN 357. I never did put it to use on the 357 and sent it to jred that says he runs the 24" on the 262. I wouldnt have had any problems with putting it on the 362xp.  I would prefer the torque of the 365 special top end on that mount.  Then again could put the 70.7cc, 74.66cc or BB 76cc on that mount for a sleeper  ;).

Title: Re: K095 bar mount
Post by: SawTroll on June 17, 2011, 11:35:12 pm

I wouldn't want a 24" on any 60cc saw, but that is just me..... ;D