Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: Cut4fun . on February 05, 2014, 04:45:25 pm

Title: Partner 5000 plus PHO weight
Post by: Cut4fun . on February 05, 2014, 04:45:25 pm

Partner 5000 plus PHO weight.

 One of my favorite all time saws.

Title: Re: Partner 5000 plus PHO weight
Post by: SawTroll on February 06, 2014, 09:44:13 am

Nice - no real surprice there. :)

Now it would be interesting to compare it to a P5500 and/or PP325....

Title: Re: Partner 5000 plus PHO weight
Post by: Cut4fun on February 06, 2014, 03:13:51 pm

Quote from: Cut4fun on February 06, 2014, 03:12:18 pm

Niko I never weighed any of my poulan pro 325 saws. They felt just like the partner 5000 saws in my hands.

Did find this info that puts it in that area of PHO weight and what they sold for new.  So they were only sold 3 years?

325   1990   $490.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    53
   
Engine Size Cubic Inches:    3.2
Dry Weight:    11.5
   
Bar Oiler Type:    Automatic
   
Bar Length:    16



325   1989   $490.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    53
   
Engine Size Cubic Inches:    3.2
Dry Weight:    11.5
   
Bar Oiler Type:    Automatic
   
Bar Length:    16



325   1988   $490.00   
Engine Make:    Poulan
   
Engine Size Cubic Centimeters:    53
   
Engine Size Cubic Inches:    3.2
Dry Weight:    11.5
   
Bar Oiler Type:    Automatic
   
Bar Length:    16

Title: Re: Partner 5000 plus PHO weight
Post by: SawTroll on February 07, 2014, 07:11:06 am

Quote from: SawTroll on February 07, 2014, 06:55:59 am

Thanks, that makes sense!

The main reason I asked is that the only specs I have seen for the P5500 show a weight of about 12.1 lbs (5.5 kg really).

I don't know how long those saws were made, in either color.

Btw, 1988 - 1990 indicates they all were made at the Husky factory.

Title: Re: Partner 5000 plus PHO weight
Post by: Cut4fun on August 03, 2014, 04:57:47 pm

Last NLA crankcase gasket set I had.  Make good use of it tbone75  ;)

(http://i59.photobucket.com/albums/g289/doemaster789/smiles/newbrewgasketset003_zps7a26774a.jpg) (http://s59.photobucket.com/user/doemaster789/media/smiles/newbrewgasketset003_zps7a26774a.jpg.html)

Title: Re: Partner 5000 plus PHO weight
Post by: tbone75 on August 03, 2014, 06:43:39 pm

You can bet it will be put to very good use !

Thank you very much !!

Title: Re: Partner 5000 plus PHO weight
Post by: Old Iron Logging on August 03, 2014, 06:58:04 pm

I was given a 5000 Plus by a co-worker this week. If the cyl cleans up its will get a 246 piston. If not whats out there for cylinder options?

Title: Re: Partner 5000 plus PHO weight
Post by: Cut4fun . on August 03, 2014, 09:11:26 pm

Have you tried aftermarket?  Piston http://chainsawrepair.createaforum.com/partner/44mm-aftermarket-partner-5000-plus-and-jonsered-490-piston-kit/

Husky 50, 51 55 some 45mm 46mm. jred 490. 590 45mm. partner 500 open port. poulan 325 46mm hard to find cylinder, oem piston still out there.