Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => For Sale => Topic started by: aclarke on March 07, 2014, 08:43:01 pm

Title: 2100 thin ring
Post by: aclarke on March 07, 2014, 08:43:01 pm
New thin ring piston and rings 1100,2100, 2101
like to get a c note or trade towards 3120 parts.

Also have nos 2100 "jungle" pistons
Title: Re: 2100 thin ring
Post by: Cut4fun . on March 07, 2014, 11:13:47 pm
Adam their was a guy on Competition Saws wanting a 2100 piston. It is in the thread where I posted those thin rings.

Just seen he was a member here too. My work is done.
Title: Re: 2100 thin ring
Post by: Derrick Johnson on March 07, 2014, 11:42:33 pm
That would be me. I will take it. PM me let me know.

Thanks
Derrick
Title: Re: 2100 thin ring
Post by: Eccentric on March 08, 2014, 06:47:04 am
I'm interested in an NOS 'Jungle' piston (or any other NOS 1100/2100/2101/298 piston).  Let me know what you want for one.   'Thick' ring is fine.
Title: Re: 2100 thin ring
Post by: aclarke on March 08, 2014, 08:59:24 am
75 on the NOS thick ring. Shoot me an email.  Mcphersontree@gmail.com

Adam
Title: Re: 2100 thin ring
Post by: jacob j. on April 01, 2014, 11:39:22 am
Adam- let me know what you're looking for on 3120 parts. I'm rebuilding a runner and will have many left overs, including carbs. The rebuilt runner will also be up for trade.
Title: Re: 2100 thin ring
Post by: adam32 on April 01, 2014, 03:29:20 pm
Adam- let me know what you're looking for on 3120 parts. I'm rebuilding a runner and will have many left overs, including carbs. The rebuilt runner will also be up for trade.

I'm interested too JJ, whatever Adam doesn't want I want and then eventually I'll send it to him anyway lol.

Let me know about the one you're rebuilding, I might want it before you have it back together...
Title: Re: 2100 thin ring
Post by: aclarke on April 01, 2014, 11:37:05 pm
JJ. Thank you.  Looking for a case, don't mind if it needs welding/machining.  Hope you've been Well!
Title: Re: 2100 thin ring
Post by: jacob j. on April 02, 2014, 11:19:31 pm
Sounds good Adam and Adam. I got extra handles, carbs, jugs for sure. The only case I have is on the runner. I have a new OEM gasket set and new Nachi bearings to put in it here in a few days. I have a 394 flywheel and ignition for it. The stock jug and piston are pristine.
Title: Re: 2100 thin ring
Post by: aclarke on April 03, 2014, 09:50:33 am
Some of the non oem case bearing have a smaller radius on the outer lip of the I.d and don't allow the larger radius on the crank to seat properly. The Nachi bearing Work ok?