Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: Largefather on April 20, 2014, 09:46:55 pm

Title: Dolmar 116si Help!
Post by: Largefather on April 20, 2014, 09:46:55 pm

My Dolmar 116si has a scored cylinder...I need a replacement. The current one is beyond salvaging!
Anybody aware of where I can locate one or is there a another cylinder/model that could be used with the same Bore & Stroke?
Ok...just was informed that a Dolmar Piston/Cylinders for 6000i, 6800i or 120si will also work...the only difference is the braking mechanism.
Anybody got one or know where I can find one?
Thanks,
Reg

Title: Re: Dolmar 116si Help!
Post by: 660magnum on April 20, 2014, 10:12:18 pm

Be patient and keep searching.

I lucked up on a couple hard to find Dolmar cylinders on Ebay after looking for a while.

Set yourself up a book mark for a search of the cylinder and check it every day.

Title: Re: Dolmar 116si Help!
Post by: Largefather on April 20, 2014, 10:40:23 pm

GOOD COUNCIL...THANKS! :D

Title: Re: Dolmar 116si Help!
Post by: 3000 FPS on April 21, 2014, 09:22:19 pm

Quote from: 660magnum on April 20, 2014, 10:12:18 pm

Be patient and keep searching.

I lucked up on a couple hard to find Dolmar cylinders on Ebay after looking for a while.

Set yourself up a book mark for a search of the cylinder and check it every day.

That is how I found my ignition for my Dolmar 119.