Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: shawn on July 20, 2014, 10:39:51 am
-
Hi all, I'm new here. I'm wondering if anyone can help me find a trigger unit for my 075. Or maybe an ignition module solution. Any ideas?
-
http://www.ebay.com/itm/OEM-STIHL-Ignition-Triggering-module-1114-400-1000-or-1217-280-101-for-Many-Saws-/251420530879?pt=LH_DefaultDomain_0&hash=item3a89d4d8bf
-
You can sometimes find the non points coils on eBay also. The older cut off saws coil works too but they are limited rpms. Ts760
-
I've been on eBay daily. Have yet to find one. The link above seems to be dead. Emailed "chainsawr", hope to her from them.
-
Jmesters link works for me
-
The Ebay one works for me
(http://i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/e4IAAOxyNwNSJ6Ro/$T2eC16hHJFsFFR7M51eSBSJ6RnmYJ!~~60_57.JPG)
-
I don't know. It keeps coming up blank. I'll try an eBay search. I can't understand why I haven't found that unit. I check regularly. I did find a couple aftermarket external triggers though.
-
Unfortunately I need the full round unit. Thanks for the reply though.
-
Wasn't that trigger used on many stihl chain saws/ cut - off saws??
Ie, 028,032,042,048,051,075,076, TS510/760?
P/n. 1118 400 1004
" 1001"
-
I read somewhere that the small external trigger can be used under the flywheel like yours is set up. Might be worth trying/researching it?
-
Part smart says the 1114 for the 075 not the same unit as the 1118. Not to say that it won't work. The 1118 is more of a small rectangle. The 1114 is used on the ts 510/051 and the 1118 is used on the 028/032/042/048/076
-
This is the first I've heard of any of these units. Do you have the entire part #?
-
JMester's number comes up with a few ebay sellers with p/n 1114 400 1004 ( guaranteed used ) donut shaped triggers like yours. Kinda price at $65. Might be an easier route vs, burning time/frustration trying to make the external trigger work under the flywheel, although it's is supposed to be an option...
-
Adam do you think the 1118 trigger unit would work I think it is mounted near the coil on an 028 may work for him may just have to change some wiring around. Not sure if there are differences in when I t would trigger to fire the secondary windings
-
There's an old AS thread about converting the donut shaped internal trigger to the small external type we've been talking about. States that the small trigger can be mounted under the fan wheel as per the original. I've never done this so though... guy on ebay has 5-6 good donut types that would be a sure thing
-
I have not either. But would like to read the thread on as do you happen to have the link.
-
Try: stihl 075/076 ignition thread on AS, somewhere within all the BS! Lol...
-
I have an old 075, that the horseshoe trigger failed on
and replaced with a nova 2 unit 30.dollars Canadian at NAPA
auto parts .I mounted the new trigger onto the body and it starts
way better and nice blue spark