Chainsaw Repair
Dealers New Used OEM Aftermarket Chainsaw Parts online => Other dealers online => Topic started by: KilliansRedLeo on July 21, 2014, 03:39:38 pm
-
Anybody got a source for Oregon or any other Square Ground loops?
-
Madsen's. order CL
You need to call. http://www.madsens1.com/
-
Bailey's will make up loops of CL for you. It is so much a drive link. Not out of line with the price of LGX factory loops.
-
Madsens is 2 for 1 on loops. I think you pay list price on it and the 2nd is free. Last time I got some they were $.38 a dl or really $.19 a dl.
-
Thinking 100' is now around 229 with 15 shipping. Need to call and see if they still got it.
-
If you want stihl and have a good dealer. Just get you some RSLK or go online feebay.
-
Found a post from 2010 I made.
For you guys talking about stihl and oregon chain cutting speeds. I tested cut speeds of stock chains I dont think I had a fresh loop of LG to try.
I found a nice clean 10"x10" very dry poplar cant in the barn that has been there for well over a year now.
Saw was a 357xp 7T running 93 octane 32:1 and a rich 13.8k. 3 cuts per chain, which allowed for the unseen knot hit and operator error in some of the times.
I know factory sharp chains are not the sharpest out of the box, but I wanted to have a base to go off of. So RSLK, RSLHK, CL, RS, factory sharp were tested.
A. Stihl RSLK factory sharp..................................4.09...4.53 ...4.13
B. Stihl RSLHK factory sharp.................................4.47...4.74. .4.28
F. Oregon CL factory sharp..................................3.88....4.20....4.25
K. Stihl RS factory sharp....................................4.18..... 4.21....4.12
-
Thinking 100' is now around 229 with 15 shipping. Need to call and see if they still got it.
It is went up to $249 or $259 now. Stihl went up to $300 a roll now.
-
Thinking 100' is now around 229 with 15 shipping. Need to call and see if they still got it.
It is went up to $249 or $259 now. Stihl went up to $300 a roll now.
Still better then most sellers out there. Thanks for update.