Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: Cut4fun . on August 09, 2014, 11:37:20 am

Title: Square File
Post by: Cut4fun . on August 09, 2014, 11:37:20 am
Just posting pics of  the square files I had left over.  Had many other makers that I used up square filing  and then used as raker files before tossing. 

5 on left normal 6 sided bevel. 2 are stihl that I bought long ago and went NLA I think.

2 on right is 4 sided and I liked these.  http://www.baileysonline.com/Chainsaws/Files-Filing/Chisel/Vallorbe-Single-Bit-Chisel-File.axd

These are going to be traded or sold.

Title: Re: Square File
Post by: Philbert on August 09, 2014, 01:09:13 pm
What are you asking?

Philbert
Title: Re: Square File
Post by: Cut4fun . on August 09, 2014, 01:10:48 pm
What are you asking?

Philbert

PM in route.
Title: Re: Square File
Post by: Philbert on August 09, 2014, 05:10:20 pm
Sounds like a deal!

Thanks!

Philbert
Title: Re: Square File
Post by: Cut4fun . on August 09, 2014, 05:37:06 pm
Cool. Thanks.
Title: Re: Square File
Post by: Philbert on August 09, 2014, 06:03:30 pm
Consider yourself de-filed!

Philbert
Title: Re: Square File
Post by: Cut4fun . on August 09, 2014, 06:42:31 pm
Consider yourself de-filed!

Philbert

 :o :o

We having a saying at work. If your scared, say your scared and then we laugh.  :o ;) ;D :D
Title: Re: Square File
Post by: Cut4fun . on August 13, 2014, 03:50:00 pm

Philbert

So did they stay put.   ;) :D :D :D :D ;D
Title: Re: Square File
Post by: Philbert on August 13, 2014, 11:58:09 pm
Could have dropped them from an airplane in the ocean and retrieved them 50 years later with no worries!

Thanks!

Philbert

Title: Re: Square File
Post by: Cut4fun on August 14, 2014, 01:41:15 pm
For some reason I had a bad feeling with the bubble wraps envelope ripping open, so I put your address on the files inside too.  Then reinforced the ends of envelope.
Title: Re: Square File
Post by: Cut4fun . on November 30, 2019, 07:55:07 am
Love the look and feel of these new vallorbe double bevel square files.  Seen them at the local shop south of me.

One I checked out of the box had a super nice corner on it. 

Shop worker hand modeling.



Title: Re: Square File
Post by: Derf on December 24, 2019, 09:43:06 pm
Love the look and feel of these new vallorbe double bevel square files.  Seen them at the local shop south of me.

One I checked out of the box had a super nice corner on it. 

Shop worker hand modeling.

Where are these available?
Title: Re: Square File
Post by: Cut4fun . on December 25, 2019, 07:42:23 am
Love the look and feel of these new vallorbe double bevel square files.  Seen them at the local shop south of me.

One I checked out of the box had a super nice corner on it. 

Shop worker hand modeling.

Where are these available?

Vallorbe

Dealer south of me carry's them.

He also has been selling the files on my chainsaw repair group FB
Title: Re: Square File
Post by: Derf on December 26, 2019, 10:33:05 am
Love the look and feel of these new vallorbe double bevel square files.  Seen them at the local shop south of me.

One I checked out of the box had a super nice corner on it. 

Shop worker hand modeling.

Where are these available?

Vallorbe

Dealer south of me carry's them.

He also has been selling the files on my chainsaw repair group FB

I donít use FB. Let me know if that dealer sells online or ships.
Title: Re: Square File
Post by: Derf on December 31, 2019, 02:01:01 am
Just following up on the name of the dealer where to get these.
Title: Re: Square File
Post by: HolmenTree on December 31, 2019, 06:53:33 am
Just found this . Great to see their finally available in North America!
I've been watching the European's with these for the last few years.
Title: Re: Square File
Post by: HolmenTree on December 31, 2019, 07:02:58 am
This is the Vallorbe file I'm interested in. Would make  hungry cutters for my bikesaws.
I saw  a recent couple of Stihl patents that have a similar file and chisel bit cutter design.
Title: Re: Square File
Post by: Cut4fun . on December 31, 2019, 07:51:53 am
This is the Vallorbe file I'm interested in. Would make  hungry cutters for my bikesaws.
I saw  a recent couple of Stihl patents that have a similar file and chisel bit cutter design.


I used those in the end. Most of the chains I did in chain build off were using those.

Lot of guys dont like them as they were thin and flexed. Also ones recommended with the ATOP file guide.

2 I had left on right. 



Title: Re: Square File
Post by: Cut4fun . on December 31, 2019, 07:54:37 am
Just following up on the name of the dealer where to get these.

I would need to look it up again, cant recall (do know named after his son that died in excavating accident). Very small place.
Title: Re: Square File
Post by: Derf on December 31, 2019, 07:04:51 pm

I would need to look it up again, cant recall (do know named after his son that died in excavating accident). Very small place.

Thank you sir, looking forward to the report.
Title: Re: Square File
Post by: Cut4fun . on January 01, 2020, 07:56:57 am

I would need to look it up again, cant recall (do know named after his son that died in excavating accident). Very small place.

Thank you sir, looking forward to the report.

Sawyer's Saw Shop
Title: Re: Square File
Post by: Derf on January 01, 2020, 09:19:56 am

Sawyer's Saw Shop

Did a google search, all I see is a Facebook page for a guy that does cabinetry based out of Texas.

Is Sawyer the guyís sonís name? The one you said died in an accident? Is the dealer that you said is south of you in Ohio?
Title: Re: Square File
Post by: Cut4fun . on January 01, 2020, 10:36:10 am

Sawyer's Saw Shop

Did a google search, all I see is a Facebook page for a guy that does cabinetry based out of Texas.

Is Sawyer the guyís sonís name? The one you said died in an accident? Is the dealer that you said is south of you in Ohio?

Yep to everything in last sentence. South of me in Ohio about 25mins one way.   I dont even see a # online weird. Like I said small shop.   

I know he ships as he has shipped files, saws, etc on FB. ;)

UPDATE: Friend is getting me # to owner.  He also said they are sold out of those right now, but ordering more.   
He just sent me owners personal # to give you if wanting to call him. 

Title: Re: Square File
Post by: Derf on January 01, 2020, 11:41:50 am

Yep to everything in last sentence. South of me in Ohio about 25mins one way.   I dont even see a # online weird. Like I said small shop.   

I know he ships as he has shipped files, saws, etc on FB. ;)

UPDATE: Friend is getting me # to owner.  He also said they are sold out of those right now, but ordering more.   
He just sent me owners personal # to give you if wanting to call him.

Thanks! PM me the number if you donít want to post it here. Iíll give him a call about the files.
Title: Re: Square File
Post by: Cut4fun . on January 01, 2020, 03:27:35 pm