Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: Hoggwood on December 13, 2014, 04:20:34 am
-
I am just letting you folks know that I tracked down an OEM set of gaskets and seals for my 440 if I ever need them. I am going to find a scanner and make a pdf copy for those that may need them as well. Perhaps they are applicable to the similar 100cc Mac and Jonsered saws as well? I am sure others will know.
Cory
-
PDF's are finished. Models R435 and R440T as printed on package. Perhaps for others as well? I printed and checked scans at actual size. Dead-on.
Let me know if you need them.
Cheers - Cory
-
The R435 has the same case surface as a p85, because I recently assembled a p85 using one r435 case half.
-
So what all saw models you guys thinking they will work on? Crankcase gasket mainly.
-
I am certain the case gasket will work on the R435/R440 and the P85/P100 and variants of the P100.
-
PM 1000 and Jonsereds 1020 as well?
Cory
-
I need a pdf gasket for the R440T. Thanks
-
I sent you a message regarding the gasket scans. The scan is too big to attach here.