Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Recalls Lost or Stolen => Topic started by: Cut4fun . on March 04, 2015, 02:26:45 pm

Title: Recall Troy-Bilt - Craftsman Chain Saws
Post by: Cut4fun . on March 04, 2015, 02:26:45 pm
Old but new to me.

MTD Southwest Inc. Recalls Troy-Bilt, Craftsman Chain Saws, Breaking Handles Pose Laceration Hazard

FOR IMMEDIATE RELEASE
Originally issued November 28, 2006
Revised January 26, 2011
Release #07-040    Firm's Recall Hotline: (888) 848-6038
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

MTD Southwest Inc. Recalls Troy-Bilt, Craftsman Chain Saws, Breaking Handles Pose Laceration Hazard

 

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: Troy-Bilt and Craftsman Brand Gasoline Chain Saws

Units: About 76,000

Importer: MTD Southwest Inc., of Tempe, Ariz.

Hazard: The chain saw's plastic front handle can break during operation. If this occurs, the saw would be difficult to control and poses a risk for lacerations.

Incidents/Injuries: MTD has received two reports of consumers losing control of the saw when the handles broke during use. One consumer reported bruising to his elbow and the other received burns to his fingers after contacting the muffler when the chain saw he was using broke and he lost control of the saw.

Description: These Troy-Bilt and Craftsman brand chain saws are powered by a two-cycle gasoline engine ranging in size from 46cc to 55cc. They are equipped with either an 18-inch or 20-inch bar. There are four Troy-Bilt models affected: 41AY00AR966, 41AY60AR766, 41AY90AR766 and 41AY08AR966. There is one Craftsman "Incredi-Pull" model affected: a 55cc two-cycle gasoline engine with an 18-inch bar and model number 316.350840. The model number of the chain saw is located on the engine casing.

Sold at: The Troy-Bilt brand chain saws were sold at independent retailers, home improvement and hardware stores nationwide from January 2004 through June 2006 for between $200 and $250. The Craftsman brand chain saws were sold at Sears and Kmart stores nationwide from January 2004 through June 2006 for between $190 and $230.

Remedy: Consumers should stop using these chain saws immediately, and contact MTD to receive a free service kit with a replacement handle and installation instructions. Sears customers will be mailed a free service kit with a replacement handle and installation instructions.

Consumer Contact: For more information, contact MTD toll-free at (888) 848-6038 between 8 a.m. and 5 p.m. ET Monday through Friday, or log onto the company's Web site at www.troybilt.com - Sears customers should call Sears at (800) 659-7026 between 7 am - 9 pm CT Monday through Friday, 7 am - 6 pm Saturday.

http://www.cpsc.gov/en/Recalls/2007/MTD-Southwest-Inc-Recalls-Troy-Bilt-Craftsman-Chain-Saws-Breaking-Handles-Pose-Laceration-Hazard/
Title: Re: Recall Troy-Bilt - Craftsman Chain Saws
Post by: RoyM on March 04, 2015, 09:38:15 pm
They were built by Jenn Feng in China under the McCulloch brand which has since been sold to Husqvarna. MTD no longer supports the line.
Title: Re: Recall Troy-Bilt - Craftsman Chain Saws
Post by: 660magnum on March 04, 2015, 11:22:46 pm
I had a Jenn Feng Mac 38cc. It didn't run as strong as a Mexican Mac. The parts looked as though they would interchange?