Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Wanted => Topic started by: MixGasHaulAss on August 27, 2015, 06:45:05 pm

Title: Walbro HDA-77 -- Titan 57 Carb
Post by: MixGasHaulAss on August 27, 2015, 06:45:05 pm

Looking for one or two of these carbs, or the 77-1 or 77-b etc for my Titan 57. I am paypal ready. Thanks everyone.

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: aclarke on August 27, 2015, 11:27:32 pm

Are you missing the carburetor?

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: MixGasHaulAss on August 27, 2015, 11:30:09 pm

I have one but Ive already rebuilt it once and these carbs are usually only good for 2 rebuilds. I also just bought a second Titan 57 that I would like to have a spare for.

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: Cut4fun . on August 28, 2015, 09:20:54 am

The pic of the one in the poulan 3450 carb thread was member chainsawr.  http://chainsawrepair.createaforum.com/index.php?action=profile;u=193

If you dont see anymore on his site. Just PM email or call. He usually has stuff not listed.  @Chainsawr

http://store.chainsawr.com/

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: MixGasHaulAss on November 30, 2015, 06:09:00 pm

Bump. I am still on the hunt for for extra parts for my Titan 57, ESPECIALLY the carbs. Paypal ready. Thanks.

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: sharkey on December 05, 2015, 10:06:38 pm

I just put a new HDA-66 on an Echo 600p that Ive been playing around with.  Am I correct that the HDA-77 uses the nozzle style high side check valve and the HDA-66 uses the screen?  Both have the 15.8 venturi according to Walbro.  Both are listed as Mac carbs.       

If this is what your looking for, send me an offer via private message and we will go from there.   

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: Cut4fun . on December 05, 2015, 10:20:58 pm

Quote from: sharkey on December 05, 2015, 10:06:38 pm

I just put a new HDA-66 on an Echo 600p that Ive been playing around with.  Am I correct that the HDA-77 uses the nozzle style high side check valve and the HDA-66 uses the screen?  Both have the 15.8 venturi according to Walbro.  Both are listed as Mac carbs.       

If this is what your looking for, send me an offer via private message and we will go from there.   

@MixGasHaulAss

Title: Re: Walbro HDA-77 -- Titan 57 Carb
Post by: sharkey on December 12, 2015, 05:44:05 pm

Hi Cut,
I basically searched through piles of carbs to find that Mac HDA that had the venturi as close to the Echo cs-620 application of Walbro HDA-316 (15.8 V).  The 600p came with HDA-268 which is 15.0 V.  I was lucky to find a brand new Mac carb which you know doesnt happen every day.  I also got lucky with the placement of the throttle and choke shafts and didnt have to work around those too. 

For this 600 project Im going to try the HDA-63 (8000) carb next.  If this guy wants this Mac carb I will buy the one you have for sale.   

Thanks,
Bob