Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => McCulloch => Topic started by: jrdplowing on September 13, 2015, 09:28:20 am
-
how critical is primer bulb on this saw,it is missing the pump bulb but the housing, lines, and duckbill is there,but is it possible if i run the tank out of gas and then refill and try to restart,that without the primer bulb it is not getting any gas up in the line to the carb,and does it matter the way it is hooked up because i noticed a longer fitting and a short fitting on the back of the primer assembly,does the long come from the tank and the short go to carb,thanks for any help
-
mcculloch 1435 ipl http://www.mcculloch.com/ddoc/MCCI/MCCI2008_USen/MCCI2008_USen_MCC1435A-9096311037_966993701.pdf
-
acctualy my 1435 is compleatly different,but thanks for the info
-
So what do you have? Mac cat style? http://chainsawrepair.createaforum.com/mcculloch/mac-cat-38cc/
-
Look at these and match yours up. McCulloch Chainsaw Parts List Directory IPL list http://www.barrettsmallengine.com/mcculloch/chainsawpartslist.html
-
yes that is the way my bulb is situated but it does not show the line routing,does it matter,i think yes because of the 2 different size nipples on the bulb, i have a new bulb coming maybe it will show routing,thanks
-
Yes it matters. Look close on back of primer base. Should show in and out or at least one of them.
-
ok thanks
-
yes you were right the small nipple is marked in,so i pulled it over alot and no fuel will come up the line,so iam going to wait and try with the primer bulb,and dont try wetting the air filter it just floods it and wont start,thanks again