Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: jeff.lary on October 10, 2015, 03:19:56 pm

Title: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on October 10, 2015, 03:19:56 pm
What brands can I find a clutch for that will also fit my Partner 500 like I think maybe a husky 455 rancher? if you know the magic words I need to say to end up with a new clutch  please speak em. Thanks Jeff
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 10, 2015, 03:24:36 pm
500 5000 490 5500 325 590 off hand
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 10, 2015, 03:29:39 pm
505303277 replaced by 503503201 changed to 537110502

HUSQVARNA    55, 50, 51, 254, 257, 261 Chainsaw

Poulan    501455403

Now double check everything posted as I am just taking from websites info on search.
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 10, 2015, 03:31:17 pm
http://www.ereplacementparts.com/clutch-p-616555.html

Husqvarna
55 Rancher (2007-02) Chainsaw
55 Rancher EPA (2006-02) Chainsaw
55 Rancher EPA (1998-08) Chainsaw
55 Rancher EPA (2000-05) Chainsaw
55 Rancher EPA (2004-01) Chainsaw
50 (1985-02) Chainsaw
50 (1986-06) Chainsaw
50 (1987-06) Chainsaw
50 (1988-03) Chainsaw
50 (1989-01) Chainsaw
50 (1990-01) Chainsaw
51 (1990-01) Chainsaw
51 (1991-10) Chainsaw
51 (1994-06) Chainsaw
51 (1998-06) Chainsaw
51 (2000-05) Chainsaw
51 EPA (1998-06) Chainsaw
51 EPA (2000-05) Chainsaw
55 (1990-01) Chainsaw
55 (1991-10) Chainsaw
55 (1994-06) Chainsaw
55 (1998-06) Chainsaw
55 (2000-05) Chainsaw
55 (2006-02) Chainsaw
55 (2007-02) Chainsaw
55 EPA (1998-06) Chainsaw
55 EPA (2000-05) Chainsaw
55 EU1 (2006-02) Chainsaw
55 EU1 (2007-02) Chainsaw
254 (1988-02) Chainsaw
254 (1990-05) Chainsaw
254 (1992-10) Chainsaw
254 (1994-06) Chainsaw
254 (1996-01) Chainsaw
254 (1998-03) Chainsaw
254 (2001-09) Chainsaw
257 (1994-06) Chainsaw
257 (1996-01) Chainsaw
257 (1998-03) Chainsaw
257 (2001-09) Chainsaw
261 EPA (1998-03) Chainsaw
261 EPA (1999-06) Chainsaw
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on October 10, 2015, 03:35:23 pm
Wow how did you find that information??? Cool thanks a bunch now I have to take some notes !!
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on October 14, 2015, 05:57:01 pm
What kind of a phrase did you type in and to where did you type it?, to get a list like this? Thanks a bunch I have one on the way somewhere in the mail. I will be wanting seals for a( 5000 / 500) I am sure they are the same. I would try to do a similar search for the seals too. I think my old dealer can get them but I was just curious. Thanks for the help Jeff
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 14, 2015, 06:00:23 pm
I just do a quick search and copy paste info. Dont save nothing but to here.  Yep seals are common too.

Busy cooking right now. But just go to Jacks small engine and run poulan pro 325 for seals and other parts too. ;)  Partner 5500 = 325 just bigger bore then 5000 500 and updated IMO.
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on October 15, 2015, 05:11:29 pm
well thanks for your help I just printed off the list of suitable clutches I will be adding that to my Partner note book !!!
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 15, 2015, 06:08:22 pm
seal 505275719

HUSQVARNA OIL SEAL FITS 357 245 359 346XP 362XP 365 505275719 


Under poulan 325 $7.77 at ordertree 505275719 Seal


http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.TRS5&_nkw=505275719&_sacat=0
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on October 15, 2015, 06:11:33 pm
partner 5000 IPL http://files.chainsawcollectors.se/downloads/brand/partner/Partner5000H5000HPlus-85.pdf
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on November 21, 2017, 08:22:41 am
I don't come here very often but I wanted to say thank you to "Cut For Fun".
 I have a 5000 that is giving me fits lately and I think? it may be a seal. No matter how often I set the idle after a few minutes it is right back to a very high idle. The chain spinning very fast so it could be a clutch too. When I hold it upright( in the normal cutting position) it revs very high , but if I turn it on it's side ( PTO) down towards the ground the high rev goes away. In fact if I left it that way without blipping the throttle I think it would stall out.
  Well anyway I wanted to buy new seals and a new clutch but I could not find what I needed,.. then through googling ( clutches that will fit my 500 or 5000) I ended up finding this old thread.
  C.F.F had named several different part numbers that helped me find some parts I ordered 6 seals and one clutch last evening from HLSupplies . Thanks again you have always been a wealth of help to me and I am sure many others. Jeff
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on November 21, 2017, 08:27:47 am
I don't come here very often but I wanted to say thank you to "Cut For Fun".
 I have a 5000 that is giving me fits lately and I think? it may be a seal. No matter how often I set the idle after a few minutes it is right back to a very high idle. The chain spinning very fast so it could be a clutch too. When I hold it upright( in the normal cutting position) it revs very high , but if I turn it on it's side ( PTO) down towards the ground the high rev goes away. In fact if I left it that way without blipping the throttle I think it would stall out.
  Well anyway I wanted to buy new seals and a new clutch but I could not find what I needed,.. then through googling ( clutches that will fit my 500 or 5000) I ended up finding this old thread.
  C.F.F had named several different part numbers that helped me find some parts I ordered 6 seals and one clutch last evening from HLSupplies . Thanks again you have always been a wealth of help to me and I am sure many others. Jeff

 8) Thanks for feedback

Thats why I store the info broke down like I do here. Glad to here it helped even in a google search for you to find the info that could help you.

Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on November 25, 2017, 02:51:37 pm
I just came out of the woods and checked the mail. I now have 6 count em 6 new crank seals and a new clutch. They are Hyway brand from hlsupply. Now I need a new bar,.. today I was finishing up my thinning for this year in my rock maple grove and had to drop a poplar. It / I managed to get my bar pinched then before I could do anything about it the tree slid off the stump and bent/ twisted the bar right at the replaceable tip so it screwed them both I think. I will have you a shop day tomorrow and look at it. I swear you cannot have enough replacement parts around. I have been very lucky though I have never ruined a bar in all my years and this one was a Forrester so it was not too expensive anyway. I have heard nothing good about Forrester bars but for the money they have been ok to me.
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: Cut4fun . on November 25, 2017, 03:53:46 pm
Let us know how those aftermarket seals hold up.  Never ordered seals from HL. Only used oem in partner saws.
Title: Re: Which brands and Models have a clutch that will fit my 500 ?
Post by: jeff.lary on November 26, 2017, 12:38:44 pm
I got them put in and the new clutch put on now I just need to have time to run it some. When removing the seals I noticed that the Flywheel side seal was not in straight. One side was higher than the other by about 1/16 to an 1/8", don't know if that may have caused the fast idle issue or not.