Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: blsnelling on February 27, 2011, 01:31:31 pm

Title: Scratcher Chain
Post by: blsnelling on February 27, 2011, 01:31:31 pm
Does anyone here know how to sharpen scratcher chain?  I've got a Mall 6 here that I just got running last night, and the chain will need touched up.
Title: Re: Scratcher Chain
Post by: Al Smith on February 27, 2011, 07:40:17 pm
 Larry S would be the man .If you find out let me know because I have a Model 12 Mall that will need a touch up .

Of all things I said I would never own and danged if I don't have one .Never say never .
Title: Re: Scratcher Chain
Post by: Stihlboy on February 27, 2011, 09:12:38 pm
lmao how do you sharpen it?


you don't!  ;D
Title: Re: Scratcher Chain
Post by: stihlbro on February 28, 2011, 07:59:50 am
The info is in here.

http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/836baead338bd2cf88256b140011c681/$FILE/disstonDO100.pdf (http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/836baead338bd2cf88256b140011c681/$FILE/disstonDO100.pdf)
Title: Re: Scratcher Chain
Post by: Troutfisher on March 07, 2011, 07:46:38 pm
I have an old merc two man with scratcher chain on it, I figured I'd convert it to .404 if I ever get it running.
Title: Re: Scratcher Chain
Post by: Bill G on April 29, 2011, 02:16:53 am
Troutfisher,

Just run 11BC and you will be much happier.  I run 3/4 chisel but when it is gone I will be running the 11BC I would rub it sooner if I can find .122 bars.

Bill