Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Solo => Topic started by: Uncle Lee on January 10, 2016, 09:31:58 am

Title: Solo 660AV piston help
Post by: Uncle Lee on January 10, 2016, 09:31:58 am
I'm in a bind and hoping for some help. Picked up a Solo 660VA
and has a badly toasted piston. Cylinder cleaned up nice with
acid and patience. Looking for an alternate piston to fit this saw.
Specs are

12mm pin
17.40 top of pin bore to crown
43.20 total hight.
Domed top and piston ported saw

Any help would be greatly appreciated.

I also looked in the Solo 680 piston thread but didn't see any 
that would fit. All mentioned were flat tops.

Lee


(http://i234.photobucket.com/albums/ee127/leeha1959/Solo%20660VA%20piston%20002_zpshchz8btl.jpg) (http://s234.photobucket.com/user/leeha1959/media/Solo%20660VA%20piston%20002_zpshchz8btl.jpg.html)

(http://i234.photobucket.com/albums/ee127/leeha1959/Solo%20660VA%20piston%20001_zps9gdbjry6.jpg) (http://s234.photobucket.com/user/leeha1959/media/Solo%20660VA%20piston%20001_zps9gdbjry6.jpg.html)
Title: Re: Solo 660VA piston help
Post by: Cut4fun . on January 10, 2016, 09:53:18 am
Lee AV?   http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/2343f5f3073e88fd88256b5e001989be?OpenDocument
Title: Re: Solo 660VA piston help
Post by: Uncle Lee on January 10, 2016, 10:18:22 am
Thats the saw Kev.


Lee
Title: Re: Solo 660AV piston help
Post by: Cut4fun . on January 10, 2016, 10:43:56 am
Thats the saw Kev.


Lee

Fixed heading. 
Title: Re: Solo 660AV piston help
Post by: Cut4fun . on January 10, 2016, 10:46:41 am
Looks like Scott has had them in.  http://store.chainsawr.com/products/solo-660av-chainsaw-piston-and-cylinder-kit

Might call him.  Also goes by chainsawr here too.

Title: Re: Solo 660AV piston help
Post by: Uncle Lee on January 10, 2016, 10:50:47 am
Just sent him an email.

Thanks Lee