Chainsaw Repair
Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Mowers Tillers Tractors etc => Topic started by: pete on February 19, 2016, 04:44:29 am
-
A good friend of mine has been doing his best to get one of these things going motor now starts and runs but he can find no IPL or info on belt lengths for the deck/cutter blades and drive I found a tag that says
LOT MODEL 137-675662 K137H Yardman Cleveland Ohio any help appreciated
-
i get nothing on that number. mtd is parent company same mower may be labeled troy bilt or bolens or other. if motor is original date code might help. does it have variable speed sheave pulley. most mtd products rear transaxle is only forward neutral reverse varaiable speed pulley provides other speeds. find year horsepower deck width number of blades and mtd belt lengths should work .
-
model and serial number should be on a sticker under the seat. If not then if it is a F&R trans(with the shifter between your legs) with variable speed pulleys that narrows it down to just a handful of belts.
-
The factory for the riders is 1/4 mi from my house but may as well be in China. I cannot get any parts from there.
-
Use Nate's info to look up correct numbers. Under seat is where I get mine.
Then put info in this. http://www.mtdparts.com/equipment/mtdparts
-
It is a 1997 model. For some reason best known to themselves and the almighty, MTD chose to put the older Yardman products on a separate lookup which was available on microfiche. You may need to have a dealer contact the MTD distributor, they won't deal direct with the end user.
-
Thanks guys yes the Info I provided was on the silver sticker under the seat Now that I know its a 1997 model I will start searching here in oz to find a dealer would be near impossible All they want to do is sell you a new piece of chinese crap this oldie looks nice and solid so will keep hunting for an IPL if anyone finds one please leave a pm and I will get my email adress to you cheers and thanks
-
Ok he has rednecked all but the drive belt length by trial and error so if someone can help out with length or part number that will finish it cheers
-
Some pics of the mower what is needed is the length of the two drive belts he has been trying different combos but just cant get the lengths correct to allow it to drive gets one on and then another can move shifter in one direction but not the other and vice versa
-
more pics
-
and again
-
still adding I shrunk em and still to big