Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: dannyupsolate on February 22, 2016, 09:48:08 am

Title: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on February 22, 2016, 09:48:08 am

worked through 7 of these so far 5 run good 2 had busted piston at top ring grove. quality is very poor

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: RoyM on February 22, 2016, 12:17:38 pm

Why most shops won't touch them.

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on February 22, 2016, 02:05:39 pm

yep you need to be  a stubborn old mule without good sense to touch them. ;D

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on February 23, 2016, 08:53:13 pm

just got number 6 going. was rubber ring on jumpstart crankcase seal broken.

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on March 06, 2016, 11:56:00 am

number 9 25 cc bolens same engine as the rest hole in end of crank that holds pin from rod egged out ****. felt like tangled starter rope. the rope would pull a foot and stop. update piston ring hung exhaust port busted piston. first one of 25cc with busted piston.

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on April 07, 2016, 08:08:16 pm

all I    can say is i am selling the crap out of this  junk.  may be able   to afford new pair of overalls soon.. ;D

Title: Re: craftsman mtd 2 cycle weedwhacker
Post by: dannyupsolate on May 08, 2016, 10:38:28 pm

done sold  two truckloads of these it's weedeater season. i am about pooped.