Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: Old Iron Logging on December 05, 2011, 07:56:29 pm

Title: Partner 5000 Intake
Post by: Old Iron Logging on December 05, 2011, 07:56:29 pm
What kind of intake is run on the modified 5000s? Anyone have a pic they would care to share?
Title: Re: Partner 5000 Intake
Post by: Cut4fun . on December 05, 2011, 08:10:01 pm
The good ones that were 2 piece head types had aluminum milled blocks made for them. 

Mine just used the stock 5000 plastic one opened up to run a 272 MVP carb to look stock.
Title: Re: Partner 5000 Intake
Post by: Cut4fun . on December 05, 2011, 08:23:16 pm
I'll have to dig mine up. But here is some different ones with blocks I seen back in the day.

Title: Re: Partner 5000 Intake
Post by: Old Iron Logging on December 05, 2011, 08:28:51 pm
Like the bottom one.
Title: Re: Partner 5000 Intake
Post by: Cut4fun . on December 05, 2011, 08:59:12 pm
Like the bottom one.

Art I'm not sure anymore on pics I saved back then. But it could be started like this milling cyl and block etc.

Adam Clarke had made one that clamped around the cylinder too.