Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: Cut4fun . on June 18, 2016, 03:32:32 pm
-
Homelite SX135 trimmer dropped off. Never seen one with this trimmer head. Took pics.
Just a 8" piece of line threads through both ends and held in the middle.
Where would one find parts for this type of trimmer head?
-
Whatever is on it must be aftermarket.
Parts IPL shows this head for it. http://www.ereplacementparts.com/homelite-sx135-ut20601c-string-trimmer-parts-c-18807_20299_147679.html
(http://www.ereplacementparts.com/images/part_p_1108480_2639936746.gif)
-
Called owner and he really dont like the bump oringal system. So I am trying to redneck repair the stripped out insides of this aftermarket deal.
Right now waiting game 24hrs. ;)
-
Pics of whats on it that I am redneck repairing. Least trying.
-
Homelite SX135 trimmer dropped off. Never seen one with this trimmer head. Took pics.
Just a 8" piece of line threads through both ends and held in the middle.
Where would one find parts for this type of trimmer head?
I have an IPL for the SX135, but the parts don't look like the pics. My IPL for that trimmer says DA-98866-A retainer - DA-98912-D. I have those parts in my Homelite trimmer inventory.
chainsawlady
-
Homelite SX135 trimmer dropped off. Never seen one with this trimmer head. Took pics.
Just a 8" piece of line threads through both ends and held in the middle.
Where would one find parts for this type of trimmer head?
I have an IPL for the SX135, but the parts don't look like the pics. My IPL for that trimmer says DA-98866-A retainer - DA-98912-D. I have those parts in my Homelite trimmer inventory.
chainsawlady
Thanks.
Pics online of the 2 parts. I had both here too
(http://i.ebayimg.com/00/s/MTUwMFgxNDU1/z/8HEAAOSwwbdWHWqx/$_62.JPG?set_id=880000500F)
(http://i.ebayimg.com/images/g/4n8AAOSwtJZXVF7p/s-l400.jpg)
-
I think I found what was used on this trimmer head. GrassGator aftermarket http://www.shop.grassgator.com/GrassGator-5600-Trims-Edges-5600.htm
(http://www.shop.grassgator.com/images/13908566988521263661012.png)
-
Redneck repair worked. Now to see how long it last him with use.
-
I have a trimmer with a head that you just push 1 foot pieces into the head x 2 so no storage in the head at all. It is aftermarket and seem to work well. I've got it on a Toro straight shaft unit that I picked up for $10
-
I use the same set up here just cut 2 pieces of nylon poke em through the holes and do up the nut
-
Redneck fix didnt hold up. Oh well.
He put the $ used on fix toward a McCulloch weed eater I had for over 20 years.
-
Pulled the traded in homie motor and installed on a straight shaft John Deere built by Homelite I had stole the motor from for a mini tiller.
Might switch them all around someday. But the JD version the on/off hooks up to the handle switch on the tiller. The one used today is built in kill switch on motor.
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=5977.0;attach=18588;image)
(http://i59.photobucket.com/albums/g289/doemaster789/201T/minitiller001.jpg)
-
The SX135 carb work someone else videoed.
https://youtu.be/9PcleLmcMmg
https://youtu.be/-WcpYOtLt7w