Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => McCulloch => Topic started by: Jez33 on January 19, 2017, 03:05:20 pm

Title: Pro mac 46 ,clutch drum . Advice needed
Post by: Jez33 on January 19, 2017, 03:05:20 pm
Hallo,
I need some advice on getting a new clutch drum (sprocket) as on my pro mac 46 the teeth have worn out. I asked a spares dealer and the original drum will cost about £45 plus shipping which makes me think I can be throwing good money after bad, but on looking on ebay n amozon I see there's lots of different drums for as little as £3.50 ..

So my question is,  which modern day chainsaw has the same clutch drum for my  promac  46?

The sprocket has 7 teeth on my saw  but I'm guessing the sizes of the drums can be different too ?
Title: Re: Pro mac 46 ,clutch drum . Advice needed
Post by: heimannm on January 19, 2017, 08:51:15 pm
ProMac 46 is an Italian made saw, see if you can find an Efco/Olympyk/Oleomac dealer and show them your drum. 

Photos of the saw and the drum might help, depending on where you are in the world there may be other options.

Mark
Title: Re: Pro mac 46 ,clutch drum . Advice needed
Post by: pete on January 20, 2017, 12:26:58 am
try get the part number and compare that to some of the other euro macs I have a few of the italian ones and the minimac clutch drum was an exchange. will try have a look on the weekend