Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Echo => Topic started by: Jaymo on November 04, 2017, 08:50:48 pm
-
CS-330T.
Appears to be a Walbro WT 739 or WT 1015-1
There are two tabs on each of the limiter caps.
Which tabs do I remove?
Do I remove both tabs from each of the limiters?
Do I just remove the tab closest to the carb body? (needle end of cap)
Do I remove the tab farthest from the carb body (screwdriver slot end of cap)
Sorry to sound like an idiot.
Don't want to make a mistake.
Would rather ask questions before doing it, than have to ask how to fix what I did.
-
Remove both tabs so they are round and reinstall. Those tabs grind off on a bench grinder real easy but hang on to them good so they don't go flying. Steve
-
Thanks for the reply.
Have done so, and will "go loud" with the saw in a little bit.
-
Need to fine tune the carb some more, but it's responding well to the muff mod.