Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Partner => Topic started by: The Ripper on June 30, 2019, 12:09:10 pm

Title: Partner R16
Post by: The Ripper on June 30, 2019, 12:09:10 pm

This saw wasn't getting any gas and I found that the fuel filter was clogged up. It was a fiber type(with a c-clip hold it in place) and had to  cut it off from the plastic element and being an old saw,I can't find a stock replacement. What would be a suitable filter for this saw?

Title: Re: Partner R16
Post by: Cut4fun . on June 30, 2019, 12:37:08 pm

Partner R16 IPL   http://s30387.gridserver.com/partsDiagrams/Partner%20R16.pdf

Never had one so looking too.   oem 315148   

Can you just put one of these in the fuel line?   I use these in many saws as replacements. 2 different sizes I get for chainsaws.  125-528  https://www.walbro.com/products/in-tank-fuel-filters/

more info with walbro part numbers and specs.  https://www.walbro.com/wp-content/uploads/2017/05/Walbro_In-tank_filter_PS_EN.pdf

I cant tell if that # I gave for the walbro is the bigger one. So check.

Title: Re: Partner R16
Post by: The Ripper on June 30, 2019, 04:09:14 pm

Thanks, gotta measure inlet, i think the partner is 4.5mm not 5.5.

Title: Re: Partner R16
Post by: The Ripper on June 30, 2019, 04:20:25 pm

Quote from: Cut4fun . on June 30, 2019, 12:37:08 pm

Partner R16 IPL   http://s30387.gridserver.com/partsDiagrams/Partner%20R16.pdf

Never had one so looking too.   oem 315148   ( are you saying you never had a Partner r16? This saw is so smooth, powerful for it's size and very,very light.)

Can you just put one of these in the fuel line?   I use these in many saws as replacements. 2 different sizes I get for chainsaws.  125-528  https://www.walbro.com/products/in-tank-fuel-filters/

more info with walbro part numbers and specs.  https://www.walbro.com/wp-content/uploads/2017/05/Walbro_In-tank_filter_PS_EN.pdf

I cant tell if that # I gave for the walbro is the bigger one. So check.

Title: Re: Partner R16
Post by: The Ripper on July 01, 2019, 09:36:58 am

Stihl dealer down the road from me had one  for the partner

Title: Re: Partner R16
Post by: Cut4fun . on July 01, 2019, 10:52:59 am

Quote from: The Ripper on July 01, 2019, 09:36:58 am

Stihl dealer down the road from me had one  for the partner

Can you show what you ended up with? If cant post it send me email and I will.

Title: Re: Partner R16
Post by: The Ripper on July 01, 2019, 12:39:03 pm

Walb 125-528-1  The original had a tighter fit but this filter will work. Now I need a coil wire ,still runs but it needs one

Title: Re: Partner R16
Post by: Cut4fun . on July 01, 2019, 05:43:24 pm

Quote from: The Ripper on July 01, 2019, 12:39:03 pm

Walb 125-528-1  The original had a tighter fit but this filter will work. Now I need a coil wire ,still runs but it needs one

Thats the one I showed above.