Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: Cut4fun on October 23, 2019, 08:57:33 am

Title: Alpina Pro 90
Post by: Cut4fun on October 23, 2019, 08:57:33 am: Putting feelers out for Alpina Pro 90 bar in 36" 404 063

Also he said he is wanting a extra sprocket. I dont know if it is running a spur drum set up or not.

Saw is not in my hands to look at anything to see.

Just trying to help a guy I used to work with.

http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/60f1ebb8a4a305d888256b4e004f88d5?OpenDocument
Title: Re: Alpina Pro 90
Post by: exSW on October 23, 2019, 09:29:57 am: You might try a Windsor from an old Remington
Those universal fit mounts work on my Prof 700
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 23, 2019, 09:56:27 am: Alpina 90 IPL https://www.lagros.com/pdf/Alpina_90.pdf

Alpina 120 IPL https://www.lagros.com/pdf/Alpina_P120S.pdf
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 23, 2019, 10:34:48 am: Lee says this is original bar off his 120

oregon 25085-404 2563 4500 EM
Title: Re: Alpina Pro 90
Post by: exSW on October 24, 2019, 06:56:54 pm: EM sounds right
I think that's what's on mine
I forgot to check
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 25, 2019, 08:12:36 am: Quote from: exSW on October 24, 2019, 06:56:54 pm
EM sounds right
I think that's what's on mine
I forgot to check

When you said that made my brain click.

So a D005 mount? Like this http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/d9c455d6710a679b88256e0e001f48b7?OpenDocument
Title: Re: Alpina Pro 90
Post by: Cut4fun on October 25, 2019, 01:30:30 pm: Quote from: Cut4fun . on October 25, 2019, 08:12:36 am
Quote from: exSW on October 24, 2019, 06:56:54 pm
EM sounds right
I think that's what's on mine
I forgot to check

When you said that made my brain click.

So a D005 mount? Like this http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/d9c455d6710a679b88256e0e001f48b7?OpenDocument

Lee said has to be 10mm or opened up. He had one opened up before. The search cont's.
Title: Re: Alpina Pro 90
Post by: exSW on October 25, 2019, 09:20:42 pm: I'll check with calipers tomorrow
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 26, 2019, 08:15:19 am: Quote from: exSW on October 25, 2019, 09:20:42 pm
I'll check with calipers tomorrow

You have a 90 or 120?
Title: Re: Alpina Pro 90
Post by: exSW on October 26, 2019, 08:17:55 pm: Neither. Prof 700. But I think it is the same mount
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 27, 2019, 08:23:10 am: Quote from: exSW on October 26, 2019, 08:17:55 pm
Neither. Prof 700. But I think it is the same mount

I had posted this in the Oregon ref thread oct 23 below = I see the A 70 shows D096 for 28" under and D023 for over 28" wonder if same mount for 90?

I found pic of your saw. Thats like that newer one a guy was selling near me. I wonder what mount?

I would have WAG a D176 on the newer.
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 27, 2019, 08:33:13 am: oregon new chart keeps showing a D009 bar mount on a 700. I would have not guessed that. https://www.oregonproducts.eu/en/parts-lookup/chain-bar-sprocket-selector-guide/selector-guide.html
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 27, 2019, 08:35:51 am: a 70 on acres shows this. But that place is 50/50 of being right and wrong http://www.acresinternet.com/cscc.nsf/BMP/14?OpenDocument
Title: Re: Alpina Pro 90
Post by: exSW on October 27, 2019, 04:19:34 pm: Just checked
EM mount 9.5 slot
Would love to see more of that like new one
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 28, 2019, 03:03:41 pm: Quote from: exSW on October 27, 2019, 04:19:34 pm
Just checked
EM mount 9.5 slot
Would love to see more of that like new one

Is that a windsor bar on your saw? There is a EM listed in in Windsor. http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/d9c455d6710a679b88256e0e001f48b7?OpenDocument
Title: Re: Alpina Pro 90
Post by: ray benson on October 29, 2019, 11:02:34 am: Old Windsor catalog listed the Apina 90 and 120 using an HO mount
http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/966248659545364f88256e0e001fb3c1?OpenDocument
Title: Re: Alpina Pro 90
Post by: Cut4fun . on October 29, 2019, 03:38:41 pm: Quote from: ray benson on October 29, 2019, 11:02:34 am
Old Windsor catalog listed the Apina 90 and 120 using an HO mount
http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/966248659545364f88256e0e001fb3c1?OpenDocument

Thanks for that info too.

Guy just emailed me and said he bought a 32" in homelite mount that fit. But still search for 36-42 or so he said.
Title: Re: Alpina Pro 90
Post by: exSW on October 29, 2019, 08:42:07 pm: Quote from: Cut4fun . on October 28, 2019, 03:03:41 pm
Quote from: exSW on October 27, 2019, 04:19:34 pm
Just checked
EM mount 9.5 slot
Would love to see more of that like new one

Is that a windsor bar on your saw? There is a EM listed in in Windsor. http://www.acresinternet.com/cscc.nsf/14711d8004b6ea7c88256e0c0001ff32/d9c455d6710a679b88256e0e001f48b7?OpenDocument
Sanvick
Same thing I think
Title: Re: Alpina Pro 90
Post by: Cut4fun . on November 07, 2019, 11:45:03 am: He sent me pics of what he is running now. I dont even see how that fits compared to the bar mount I came up with.

Last pic is what I was thinking.