Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Chainsaws not listed - Gas OPE => Topic started by: Cut4fun . on May 16, 2020, 09:37:38 am

Title: Farmertec G372xp Hutzl Holzfforma
Post by: Cut4fun . on May 16, 2020, 09:37:38 am

Looks like they released a high top OE 372 in blue 70.7cc finally. Released some new bars too.

Also in the news = If everything goes smoothly, G272XP,G288XP,G395XP,G3120XP,G266,G888,JonCutter G7500, and several types of concrete saws all of these will be released before the end of this year.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: 3000 FPS on May 16, 2020, 11:37:32 am

Where are these made again.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on May 17, 2020, 08:51:47 am

Quote from: 3000 FPS on May 16, 2020, 11:37:32 am

Where are these made again.

China

They are making the old saws folks liked with regular carbs.  Can buy whole kits to use for parts or put together yourself. Can buy whole too.  Just another way to get the hard to find stuff.

Right now working on the AV stihl 090 handles for folks.  Some asking for the high top 288 covers. 
Guy in CR group just sold one oem on ebay that was nice for a 400+ plus bid. Crazy.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: 3000 FPS on May 17, 2020, 10:19:10 am

That is not exactly what I call cheap.   

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on May 17, 2020, 11:52:53 am

Quote from: 3000 FPS on May 17, 2020, 10:19:10 am

That is not exactly what I call cheap.   

$400+ that was for that OEM 288 nice cover on ebay. Someone bid stupid money IMHO

I myself wouldnt give that for the whole 288 oem saw myself.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on June 02, 2020, 08:57:52 am

Going to check out one of my favorites from the old days. But in a blue high top old edition 71cc clone copy. I know a friend of mine owns some of my stock 372's I built over the years if I need to compare. But should be able to tell running against my PP445 71cc

$209  or $145 for bulk or of 10.  I know a guy that has ordered 20 or 30 already and said ordering another 10 pak.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on July 21, 2020, 11:36:33 am

 OE 372xp high top in blue. 😎.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on July 23, 2020, 08:00:39 am

Why I took my g372xp down for check before even starting. I heard rumor they don’t come in the saws. The very tiny o-ring.

Dang if the throttle cable bracket don’t look like metal to me.

Title: Re: Hutzl G372 Farmertec Holzfforma
Post by: Cut4fun . on July 28, 2020, 10:24:42 am

G372xp OE have a huge squish.  Like .060  They dont seems as refined yet as the stihl clones yet. But getting there.
Plus they dont install the tiny o-ring under sleeve.

Going to be sending them some oem ones to try and make their own.

Just a couple cuts on it before checking this for someone.  No need for decomp at all. 

Going to wait and see if it gets higher once closer to break in and rings seat.  But with that huge squish cant figure much more.

But then again seen new oem at 130psi.   But mine were all 140 to 150 stock

Title: Re: Farmertec G372xp Hutzl Holzfforma
Post by: Cut4fun . on September 11, 2020, 10:15:21 am

I really like the thicker handle on the full wrap. Just couldnt say no to $29 shipped for OEM

Title: Re: Farmertec G372xp Hutzl Holzfforma
Post by: Cut4fun on March 05, 2021, 11:02:50 am

Local said he has 10 tanks through it and running perfect. He did a muffler mod.

Just in case carbs that work for these without going oem