Recent Posts

Pages: 1 [2] 3 4 5 6 7 ... 10
11
Husqvarna / Re: Husqvarna 346 OE NE
« Last post by Cut4fun . on April 18, 2024, 09:28:48 am »
Just saving info with some pics.

Husqvarna SB Service Bulletin B0200039 about when they modified the crankcase and also the gasket kit.

In 03 they changed all the case screws from that course self threading screw to regular metric thread. So the crankcase up till early 03 is a different part #

12
Husqvarna / Re: Husqvarna 346xp
« Last post by Cut4fun . on April 17, 2024, 03:38:20 pm »
My reason for the 346 IPL search this morning.
I’ve owned many OE and NE 346 353.
But first time for the first year husqvarna 346xp OE 1999.
1999-2002 showed same muffler bracket as 351 till 2003 IPl to common we used to with 2 legs.
Only grabbed it for that reason.
Plastic intake clamp even still tight.
Saw will clean up nice imo.
Even has German made Bosch in it. My old favorite plugs.

13
Husqvarna / Re: Husqvarna 346xp
« Last post by Cut4fun . on April 17, 2024, 11:07:27 am »
What was the first year the OE 346 42mm was offered? This one has the muffler bracket like the 351 did. My other OE ones had the normal later bracket they used.

Put this here too. Found the 99 IPL showing that muffler bracket. 2001 showed same. 2003 showed muffler bracket change.

IPL's I found but they only change if something superseded most times.

346 XP (1999-01)
346 XP (2001-06)
346 XP (2003-06)
346 XP (2004-03)
346 XP (2007-02)
346 XP (2007-08)
346 XP (2009-02)
346 XP EPA (2004-03)
346 XP Triobrake (2008-09)
346XP (2011-01)

14
Poulan / Re: Poulan Micro
« Last post by Cut4fun . on April 17, 2024, 09:05:43 am »
Can see the venturi sizes in Ben's pic.

Small and big for these.

15
Poulan / Re: Poulan Micro
« Last post by Cut4fun . on April 17, 2024, 07:43:16 am »
2 carbs were offered on 1800 2000 530035158 530069772 and only the one on 2300 530069772

I'll check my bought new 2000 in 94  others in bin.

Mine was small carb.  Pretty much out of these but about 5 carbs. 1 tilley bigger and walbro bigger, rest small and 1 smaller.

16
For Sale / Stihl 046 D cc cylinder OEM
« Last post by Cut4fun . on April 15, 2024, 08:38:34 am »
Stihl 046 OEM D combustion chamber.
I bought for a test mule to compare to other 52mm aftermarket cylinders on G466.
Got it from Brennan years back it seems.
She ran like they supposed to with this cylinder.
Since I knew most of these were at the top stock.
I’m done with it and will list it for $185 shipped.
Ohio if local wants it to pick up.
Paypal friends family or money order or cash local.  Can be vouched for by many.
May takes something of interest on trade.
No don’t have anything in mind. Since I don’t really need nothing.





17
Stihl / Re: stihl 044 440 046 460
« Last post by Cut4fun . on April 15, 2024, 08:35:04 am »
Stihl 046 OEM D combustion chamber.
I bought for a test mule to compare to other 52mm aftermarket cylinders on G466.
Got it from Brennan years back it seems.
She ran like they supposed to with this cylinder.
Since I knew most of these were at the top stock.
I’m done with it and will list it for $185 shipped.
Ohio if local wants it to pick up.
Paypal friends family or money order or cash local.  Can be vouched for by many.
May takes something of interest on trade.
No don’t have anything in mind. Since I don’t really need nothing.

18
Poulan / Re: Poulan 3450 Badboy Tim Allen TA BB
« Last post by Cut4fun . on April 14, 2024, 08:25:28 am »
Poulan 3450 badboy tim allen edition was just for sale with 2 macs for $50 in MI.

Looks pretty nice so saved pics.  20" bar was even nice still



19
Just saving this poulan cardboard bar cover.

20
Poulan / Poulan 3400 pulley new aftermarket
« Last post by Cut4fun . on April 12, 2024, 10:48:37 am »
Seems the poulan 3400 pulley is now offered new in aftermarket.  So no need to do that redneck stuff for same cost of pulley.

Poulan 3400 Recoil Pulley 530024233 530028487 530069290

https://www.ebay.com/itm/145538602830?itmmeta=01HV9C5038ZTSPKWTB1S8186MG&hash=item21e2c6d74e:g:v7YAAOSwQnVlrmmH
Pages: 1 [2] 3 4 5 6 7 ... 10