Author Topic: CS 2139 T carb limiters  (Read 290 times)

0 Members and 0 Guests are viewing this topic.

Offline Reddog

  • 4 cube
  • **
  • Posts: 60
  • Karma: 18
  • Tree killer
  • Location: MI
CS 2139 T carb limiters
« on: February 02, 2016, 07:56:03 pm »
How do you remove the H&L limiters?
C1Q EL33A is the carb it has.
It has pins pressed through the carb casting that only allow the metal caps to back out so far.

Looking like I might need to grind the pins out of the way.
Figured I would ask first in case I am overlooking a easier way.

Social Buttons


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18285
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: CS 2139 T carb limiters
« Reply #1 on: February 02, 2016, 08:00:08 pm »
Check the husqvarna 338 thread here. I remember having to do something on one of mine.
REDNECK Saw Repair Getter Done

Offline Reddog

  • 4 cube
  • **
  • Posts: 60
  • Karma: 18
  • Tree killer
  • Location: MI
Re: CS 2139 T carb limiters
« Reply #2 on: February 02, 2016, 08:36:33 pm »
Thanks Kevin.

Didn't find that thread when searching. Will post a copy here incase someone else is searching.


I took a bigger diameter decking or drywall screw and you have to cut the pointy tip off.  ;)  Then screw into the zinc metal cap to remove pulling straight out with pliers.

Once the L side zinc cap was removed I could adjust the H side without having to remove that one.  8)






http://chainsawrepair.createaforum.com/husqvarna/338-xpt-husqvarna/

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18285
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: CS 2139 T carb limiters
« Reply #3 on: February 02, 2016, 09:04:26 pm »
Is this what you ran into?  Only one of my 2 had this deal.
REDNECK Saw Repair Getter Done

Offline Reddog

  • 4 cube
  • **
  • Posts: 60
  • Karma: 18
  • Tree killer
  • Location: MI
Re: CS 2139 T carb limiters
« Reply #4 on: February 02, 2016, 09:58:36 pm »
Yes, metal limiters.
Seems they switched carbs in the later years. Earlier ones had the plastic wing style.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18285
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: CS 2139 T carb limiters
« Reply #5 on: February 03, 2016, 06:57:08 am »
Yes, metal limiters.
Seems they switched carbs in the later years. Earlier ones had the plastic wing style.

Yep that was what my early dated one had too.
REDNECK Saw Repair Getter Done

Offline Reddog

  • 4 cube
  • **
  • Posts: 60
  • Karma: 18
  • Tree killer
  • Location: MI
Re: CS 2139 T carb limiters
« Reply #6 on: February 03, 2016, 01:37:35 pm »
Well it was pretty simple.

Took the handle and airfilter cover off to gain more working room.
Used a finish nail and a small hammer to tap the retaining/limiter pins out into the needle area.
Then threaded a deck screw into the caps and pulled them out.

Pulled the muffler and opened up the factory hole.

Re-tuned and ready for some wood now.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18285
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: CS 2139 T carb limiters
« Reply #7 on: February 03, 2016, 02:37:56 pm »
Well it was pretty simple.

Took the handle and airfilter cover off to gain more working room.
Used a finish nail and a small hammer to tap the retaining/limiter pins out into the needle area.
Then threaded a deck screw into the caps and pulled them out.

Pulled the muffler and opened up the factory hole.

Re-tuned and ready for some wood now.

This is good to know and sound way better then what ever I did. I fumbled around.

Thanks for the update.   8)
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
11 Replies
541 Views
Last post March 09, 2011, 02:02:13 pm
by Old Iron Logging
9 Replies
368 Views
Last post December 17, 2015, 12:55:23 pm
by Cut4fun .
1 Replies
130 Views
Last post January 07, 2014, 11:00:02 pm
by jmester
6 Replies
1746 Views
Last post February 12, 2014, 09:38:10 pm
by farmboy
4 Replies
180 Views
Last post February 04, 2014, 05:38:00 pm
by winland
15 Replies
227 Views
Last post February 20, 2014, 09:34:42 am
by KilliansRedLeo
35 Replies
499 Views
Last post November 11, 2016, 11:28:35 pm
by pete
12 Replies
208 Views
Last post January 01, 2015, 10:02:43 pm
by jmester
3 Replies
200 Views
Last post June 30, 2015, 07:11:44 pm
by Jason K
5 Replies
204 Views
Last post February 21, 2016, 09:42:40 am
by jmester