Author Topic: Jonsered 2083  (Read 17340 times)

0 Members and 44 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #10 on: April 27, 2011, 01:43:56 pm »
From what MM says the rev-limited green coils are only good for 10k-11k anyways.  13.5K max is usually plus minus 500 rpm.  ;)

He also says his 475's were four stroking till 14.5k. Just like mine they 4 stroke till 14K

Do you have the rev-limited green coil in it?
well the coil is green! :'( finished putting it together. i couldn't stand it. i had to see how it runs. seems to run good. nice throttle response. idles ok too. ;D
If your coil is green it is rev limited. To about 10K at that.

here is my 475 You can hear it still 4 stroking a bit when it comes out of the cut and its set at 14,500.




Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #11 on: February 02, 2013, 11:31:52 am »
I picked up this non running 2083 today from my amish bud. Oh also a 7900 and a 261 husky. :)
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #12 on: February 02, 2013, 11:38:06 am »
Your Amish dealer is very nice to you.  8)   Is it a 77cc II or 83cc?


Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #13 on: February 02, 2013, 11:46:53 am »
Your Amish dealer is very nice to you.  8)   Is it a 77cc II or 83cc?


My guess is 83cc because i think it would say 2083II on the starter if it were 77cc. But i'll know for sure when i pull the cylinder..
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #14 on: February 02, 2013, 11:51:13 am »
Yep it should say II on recoil.


On the 261 (maybe new thread) wondering what killed it.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #15 on: February 02, 2013, 12:14:37 pm »
Low comp on the 261 and the 7900 has busted buffers but has great comp. Thats all i know right now.
Ron

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #16 on: February 02, 2013, 12:28:13 pm »
On the 7900 the spring, bolts, and travel limiter are gone from the cylinder?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #17 on: February 02, 2013, 12:56:35 pm »
Yes, they are all gone. ???
Ron

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #18 on: February 02, 2013, 01:00:29 pm »
Looks like a new bar on the 7900
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #19 on: February 02, 2013, 05:24:46 pm »
Low comp on the 261

Forgot there was another 261 :-[. I was thinking stihl new one. My bad.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
818 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
3380 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
962 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
911 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
524 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
686 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
22 Replies
2133 Views
Last post February 26, 2024, 06:51:11 am
by Cut4fun
15 Replies
1439 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
536 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
13 Replies
1122 Views
Last post February 26, 2024, 10:49:43 am
by Cut4fun .