Author Topic: Jonsered 2083  (Read 17387 times)

0 Members and 67 Guests are viewing this topic.

Offline mdavlee

  • 5 cube
  • ***
  • Posts: 138
  • Karma: 4

  • Total Badges: 19
    Badges: (View All)
    Third year Anniversary Karma Second year Anniversary Level 4 Linux User Mobile User
Re: Jonsered 2083
« Reply #30 on: February 10, 2013, 05:54:24 pm »
288 and 385 are both 54mm. The 056 also has a 54mm piston.http://northwoodsaw.com/store/index.php?l=product_detail&p=89

 The jonsered 930 is also 54 mm if I remember right. http://northwoodsaw.com/store/index.php?l=product_detail&p=58

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #31 on: February 10, 2013, 06:32:18 pm »
Ron when I was searching husky pistons before. Wasnt the ones listed above the wrong wrist pin size?  My memory isnt working again.   :-\

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #32 on: February 10, 2013, 06:37:05 pm »
Part number 503723502 54mm? http://www.baileysonline.com/itemdetail.asp?item=EHP+503723502

Another parts site says it is. Husqvarna 503723502 PISTON CPL 54mm

Like I said I would have tried the 066 way before the bb046 just by looking at paper measurements above.
I wonder about the skirt on the 066 though too. I can deal with the squish, but that skirt will change the intake timing.

.10 right  about the same as the bb372 in the the 475. The  intake sure seems to make the 475 run. Who knows till we try it.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #33 on: February 10, 2013, 06:47:46 pm »
So what are you saying Kevin? You think i should buy the 066 piston??
288 and 385 are both 54mm. The 056 also has a 54mm piston.http://northwoodsaw.com/store/index.php?l=product_detail&p=89

 The jonsered 930 is also 54 mm if I remember right. http://northwoodsaw.com/store/index.php?l=product_detail&p=58
I know the 385 is out. I need a windowed piston.
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #34 on: February 10, 2013, 06:55:08 pm »
If you can get a 505 piston I would get that.

I was going to try a 066 in the 1st 505 I got. The skirts are loose on that one.  I have 2 505 and 1 good piston.   :(

If I am thinking right. I am thinking only .075 on the intake side.

Stihl 066, MS 660
Replaces Part Number 1122 030 2005
Bore 54mm
Rings 54mm x 1.0mm
Height 42.75mm
Head Type Flat
Piston Pin 12mm x 36mm x 7.75mm
Compression/Pin to top of Piston 17.0mm

I think this was the oem 505
top of pin hole to crown 16.75mm
height 42.65mm
pin 12mm

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #35 on: February 10, 2013, 07:11:34 pm »
1/4 mm is only .010"

.1 mm =  .004"
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania

  • Total Badges: 31
    Badges: (View All)
    Level 6 Fourth year Anniversary Spammer 25 Posts in one day Karma Good 1000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #36 on: February 10, 2013, 07:22:31 pm »
There is a $65 difference in price. Maybe i will be the guinea pig and try the 066.
Ron

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171

  • Total Badges: 31
    Badges: (View All)
    Level 6 Sixth year Anniversary Fifth year Anniversary 1000 Posts Fourth year Anniversary 500 Posts
Re: Jonsered 2083
« Reply #37 on: February 11, 2013, 06:16:41 pm »
385 piston is real tall also. You could add your own windows if needed. The 288 piston is shorter but wider skirts than a 066. I do remember that from when I was going to swap a piston into a 066.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Jonsered 2083
« Reply #38 on: February 11, 2013, 06:42:00 pm »
385 piston is real tall also. You could add your own windows if needed. The 288 piston is shorter but wider skirts than a 066. I do remember that from when I was going to swap a piston into a 066.

Isnt the wrist pin a different size on the 385 etc then the 066 and 505?

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Jonsered 2083
« Reply #39 on: February 11, 2013, 07:06:00 pm »
    Husqvarna 385, 385 EPA
    Jonsered 2186
    Replaces Part Number 503 50 60 02
    Bore 53.96mm
    Height 46.5mm
    Head Type Flat
    Piston Pin 13mm x 39mm x 8mm
    Rings 54mm x 1.5mm (Caber F-Cast GH.F)
    Compression/Pin Top to top of Piston 20mm
    Compression/Pin Center to top of Piston 26.5mm

    Stihl 066, MS 660
    Replaces Part Number 1122 030 2005
    Bore 53.96mm
    Height 43mm
    Head Type Flat
    Piston Pin 12mm x 8mm x 33mm
    Rings 54mm x 1.2mm (Caber F-Cast GH.F)
    Compression/Pin Top to top of Piston 17mm
    Compression/Pin Center to top of Piston 23mm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
818 Views
Last post August 24, 2014, 10:40:36 am
by Cut4fun
38 Replies
3388 Views
Last post June 21, 2016, 01:32:54 pm
by Cut4fun .
4 Replies
963 Views
Last post October 19, 2018, 03:18:46 pm
by Cut4fun .
1 Replies
911 Views
Last post January 14, 2017, 02:17:56 pm
by Cut4fun .
1 Replies
524 Views
Last post May 24, 2018, 09:28:10 pm
by Cut4fun .
6 Replies
688 Views
Last post July 22, 2017, 12:54:36 pm
by 3000 FPS
22 Replies
2139 Views
Last post February 26, 2024, 06:51:11 am
by Cut4fun
15 Replies
1445 Views
Last post November 16, 2018, 02:56:14 pm
by Cut4fun .
3 Replies
538 Views
Last post October 23, 2018, 11:16:06 am
by Cut4fun .
13 Replies
1125 Views
Last post February 26, 2024, 10:49:43 am
by Cut4fun .