Author Topic: Another one  (Read 355 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2037
  • Karma: 199
  • Magnesium and Iron.
  • Location: Northern California.
Re: Another one
« Reply #10 on: November 24, 2016, 04:02:04 pm »
There are several 797 IPL's, as well as a few Super 797 IPL's.  In those there are a few block #'s.  There are also a few 'replacement engine' 797 block #'s that are in the cylinders/pistons/rings lists...............that are NOT in the IPL's.  Makes for a fun time when running down numbers...

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.