Forum > McCulloch
McCulloch Titan 70
Al Smith:
This is kind of an interesting saw .According to McBob and others this thing was made by McCulloch in Italy in a factory they owned .
70 cc ,vertical cylinder made around 1990 .It's in real good shape and handles the 24" bar it came with real good .
In comparrison to say the Mac 700 it doesn't quite have the grunt but has the speed of a Stihl so it about evens out .Fact it's not much different if any from a Stihl 044 powerwise .
Dumb me couldn't figure out why in the world the danged thing would sputter out after a prime because the thing had sat about 4 years .So I rebuilt the carb ,nice but not it .Fuel lines gone .Shoulda thought of that in the first place .
This model sitting on the tail gate of my Ranger is the only one I've ever seen in my lifetime except pictures on flea bay .
Posted same pic 2 times. ;)
Cut4fun .:
Never heard or seen one thanks for sharing. 8)
How about a pic or 2 under the covers.
Cut4fun .:
Specs on these saws in this link. TITANS
Al Smith:
A couple posts under the shrouding .This is the power side .The thing runs an outboard clutch like Stihl with evidently a crankshaft driven center mount oil pump .The screw right center below the clutch is the adjustment .
Al Smith:
Top side ,center combustion chamber decomp .The rubber gizmo on the spark plug boot completely seals off the top shrounding so the fan blows full force over the cylinder .Must work ,this thing is clean as a pin and I have never blown out the dust .
Navigation
[0] Message Index
[#] Next page
Go to full version