Author Topic: Partner 5000 or 500 chain brake/ side cover  (Read 2904 times)

0 Members and 0 Guests are viewing this topic.

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #10 on: January 04, 2012, 07:25:03 pm »
No problem on the type o I do it to.What is the Vice Method?Sorry i did not get back sooner I was sewing a coat problem ,,,,,Jack of some trades and I make a mess with some others.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18788
  • Karma: 370
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #11 on: January 04, 2012, 07:39:42 pm »
Old Iron Logging  told me about it and I tried it on the poulan 365 rebuild. Worked like a charm. 1st saw I tried that way without using the wifes oven to heat cases with other method.
Use socket press out and press in. Nothing to it.

REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #12 on: January 04, 2012, 07:56:34 pm »
Wow that sounds very doable if I want to send you a message when I attempt this how do I do it? I did the member search and tried hotsaw as a nickname but got no leads.Rember if you try to explain it to me keep it simpel ;D

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #13 on: January 04, 2012, 08:01:58 pm »
One more thing when you were telling me about the worm gear one of the things you said was redneck it or "cut off" what did you mean cut off if i cut off the worm gear i will be out of luck when i get ready to put things back together.Also if i ruin the gasket when i split the case will blue Permatex work instead?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18788
  • Karma: 370
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #14 on: January 04, 2012, 08:05:15 pm »
Cut only IF you have another gear to put back on.

I have only used Threebond 1194 for gasket sealer and IF crankcase came with gasket I put a gasket back in. Thats your call on putting gasket back in, but I would use 1194. Might mess up clearance, might not.
REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #15 on: January 04, 2012, 08:08:01 pm »
can I buy threebond in an auto parts store? and also do you mean some may not have a gasket. Seems like there was somthing else I wanted to ask but old age is early for me I guess.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18788
  • Karma: 370
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #16 on: January 04, 2012, 08:19:55 pm »
5000 uses gasket. My 3750 330 365 I just did not use gasket only sealer.

I doubt you will get Threebond 1194 at store. I buy it online. Never seen it in a store.

Check shipping cost. I can usually get a tube for $10 or under to my door. Last forever.

http://www.bikebandit.com...58&CAWELAID=338727097

https://www.google.com/se...cial&client=firefox-a
REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #17 on: January 04, 2012, 08:25:40 pm »
I just saw it on Bike bandit also on Amazon so thats what i will do right now I dont want to get to that point and not have the gasket material ready.
 Now where do I get the seals and berings?any saw shop do? are there two berings?.and do you put in the seals first then slid in the crank ,.....Yea I guess that is what you do,.. and do you lube the crank shaft so it slides easily into the seals?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18788
  • Karma: 370
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #18 on: January 04, 2012, 08:58:00 pm »
Online too. Ordertree is one. Order for Poulan 325. Gasket kit there too and then you will not need 1194.
REDNECK Saw Repair Getter Done

Offline Jeff

  • 4 cube
  • **
  • Posts: 52
  • Karma: 2
Re: Partner 5000 or 500 chain brake/ side cover
« Reply #19 on: January 04, 2012, 08:59:58 pm »
Ok I will well thanks for all the advice and I will let you go for now Thanks talk to you soon I am sure.

 

Related Topics

  Subject / Started by Replies Last post
18 Replies
1350 Views
Last post July 17, 2017, 06:05:48 pm
by Cut4fun .
0 Replies
240 Views
Last post July 22, 2012, 01:08:50 pm
by Cut4fun
2 Replies
381 Views
Last post February 13, 2013, 06:47:50 am
by Cut4fun .
5 Replies
182 Views
Last post February 20, 2013, 07:33:36 pm
by darren_palms
2 Replies
338 Views
Last post June 26, 2013, 07:26:21 pm
by Cut4fun .
2 Replies
223 Views
Last post November 17, 2013, 06:08:04 am
by eatonpaving
21 Replies
393 Views
Last post February 28, 2014, 09:22:18 am
by SawTroll
4 Replies
52 Views
Last post June 19, 2014, 01:06:44 am
by 660magnum
8 Replies
325 Views
Last post April 06, 2015, 06:56:20 pm
by Nathaniel Vansickle
3 Replies
45 Views
Last post November 10, 2017, 09:05:16 pm
by Guy20