Author Topic: Performance Outdoor Equipment....Dolmar parts  (Read 1794 times)

0 Members and 0 Guests are viewing this topic.

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
20" 3/8 50 total light and tough are in.

AS 001 by nathaniel vansickle, on Flickr
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2037
  • Karma: 199
  • Magnesium and Iron.
  • Location: Northern California.
My buddy finished up his 6401-to-7901 swap with the 7910 top end that his wife bought from you for his Christmas present (on my advice).  We ran it while bucking up a good sized oak blowdown a few weeks back.  Man what an improvement over the 6401 top end.  It's twice the saw that it was....8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Like Like x 4 View List

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #102 on: July 25, 2016, 01:35:58 pm »
Oregon Powermatch 20" 3/8 .050 bars

Selling these in quantities of 2 with shipping included for the east coast. $70. West of the Mississippi add $5.

large husky and Stihl mount.

Will throw in matching Oregon or Carlton chains for $13 per bar.

Email me with what you want and i will send an invoice thru paypal. performanceoutdoorequipment@gmail.com

Nate
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 1 View List

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #103 on: September 09, 2016, 02:35:34 pm »
24" K095 light and tough bars are in as well as the 16" 325 bars for the 421.

added bonus is we are restocked on 20, 24, 28" bars in large husky and stihl and now have large husky 3/8 058 24" light weight bars
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17969
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #104 on: November 10, 2016, 02:13:54 pm »
Sharing Nate's sale I seen.  Any sales on OPE and saws etc?

Always working to help the logging, arborist, and firewood community. We have worked hard to bring better pricing to the Tuscarawas/Guernsey/Coshocton counties on the items you need the most.

We now have lower everyday prices than most of our competitors sale prices.

Oregon Powermatch bars for most saws
20" $34
24" $44

20" 72LGX oregon chain is $13.49
24" 72LGX and 72JGX chain is $16.99
$0.22 per drive link on most other chains.


Total Super Bars(Tsumura)
20" $54.11
24" $61.46

Felling wedges as low as $3.99

Kinetix Bar and Chain Oil
$7.49 a gallon
$2.99 per quart

Logging and Arborists ask about our commercial discounts on parts/accessories and volume discounts on select products.

As many know by now the Dolmar chainsaws and OPE is changing to Makita branding and we are excited with what the future holds. New saws and equipment are coming along with us now having the opportunity to expand our lineup to include the Makita power tools and battery powered OPE. Thank you for the opportunity to serve you and for giving us an extremely successful first 6 years and hopefully many more to follow.

Performance Outdoor Equipment
419 E Canal St
Newcomerstown OH 43832

REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #105 on: November 10, 2016, 04:57:32 pm »
revamped the site a little over the last week. There are now tabs to sort by bar mount. Much easier to find what your looking for. Also made some changes on how the search function works, type in "total super k095" and only total super bars with k095 mount will show up.



Trying to make small improvements to the current site while I wait on ARI to get the IPL's and part numbers figured out for Dolmar/Makita on my new site.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17969
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #106 on: November 11, 2016, 04:38:57 pm »
revamped the site a little over the last week. There are now tabs to sort by bar mount. Much easier to find what your looking for. Also made some changes on how the search function works, type in "total super k095" and only total super bars with k095 mount will show up.



Trying to make small improvements to the current site while I wait on ARI to get the IPL's and part numbers figured out for Dolmar/Makita on my new site.


That is sweet. So much easier now.

How does that Total 2 20" D009 bar compare to the 20" Oregon powermatch?  I have sold out of even my own bars for guys to use when they need to take and go. Only 1 pretty used left for myself now.
REDNECK Saw Repair Getter Done

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #107 on: November 11, 2016, 06:49:39 pm »
revamped the site a little over the last week. There are now tabs to sort by bar mount. Much easier to find what your looking for. Also made some changes on how the search function works, type in "total super k095" and only total super bars with k095 mount will show up.



Trying to make small improvements to the current site while I wait on ARI to get the IPL's and part numbers figured out for Dolmar/Makita on my new site.


That is sweet. So much easier now.

How does that Total 2 20" D009 bar compare to the 20" Oregon powermatch?  I have sold out of even my own bars for guys to use when they need to take and go. Only 1 pretty used left for myself now.

not bad overall and hold up decent to firewood but tips dont last for timber cutters. for the extra money the oregon bars are the way to go unless your just looking for a budget bar.

I am adding new bars....i have almost 100 part numbers in stock but only had 50 or so on the site, slowly adding all the bars i have in stock so should be able to satisfy anyones needs when i get done
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Informative Informative x 1 View List

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Re: Performance Outdoor Equipment....Dolmar parts
« Reply #108 on: November 16, 2016, 03:15:44 pm »
Discount code "Total" for 10% off all Total branded bars
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Winner Winner x 1 View List

Offline Nathaniel Vansickle

  • Piped Saw
  • *****
  • Posts: 425
  • Karma: 80
  • Location: Newcomerstown ,Ohio
Tsumura/Total Super bars are back in stock. Dont have quite the selection we used to have but we will be adding to over the coming days and months to hopefully have a more complete line of bars than ever.
5105H and 6400H in stock

Performance Outdoor Equipment
performanceoutdoorequipment.com
Dolmar, Echo, Jonsered

Like Like x 2 Useful Useful x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
12 Replies
588 Views
Last post January 11, 2012, 01:49:08 pm
by jmester
4 Replies
1008 Views
Last post January 10, 2012, 01:40:57 pm
by Cut4fun
12 Replies
524 Views
Last post September 27, 2013, 12:32:35 pm
by Playinwood
5 Replies
1551 Views
Last post July 28, 2012, 01:14:15 pm
by Al Smith
8 Replies
114 Views
Last post October 14, 2014, 09:54:07 pm
by farmboy
Dolmar parts

Started by aclarke « 1 2 » Dolmar Makita

11 Replies
594 Views
Last post April 23, 2014, 11:50:04 am
by KilliansRedLeo
5 Replies
388 Views
Last post June 10, 2014, 04:01:41 pm
by Nathaniel Vansickle
41 Replies
657 Views
Last post May 08, 2015, 12:14:40 pm
by aclarke
8 Replies
462 Views
Last post August 08, 2015, 12:07:52 pm
by SawTroll
9 Replies
236 Views
Last post December 08, 2015, 06:28:00 am
by Fish