Author Topic: Pioneer 3200  (Read 167 times)

0 Members and 0 Guests are viewing this topic.

Offline fossil

  • 6 cube
  • ****
  • Posts: 192
  • Karma: 54
  • Location: Brampton, Ontario
Pioneer 3200
« on: October 05, 2017, 08:51:58 pm »
I fixed up this 3200. Not pretty but tons of torque. It really surprised me.

https://youtu.be/r0wNJnG8DhI



Tim

Social Buttons

Like Like x 2 View List

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4243
  • Karma: 247
  • Location: Carpenter, Wyoming
Re: Pioneer 3200
« Reply #1 on: October 05, 2017, 11:36:56 pm »
That saw looks similar to the Poulan 245 but the Pioneer 3200 is 77cc and the 245 is 73cc.   It seems to cut through your wood with no problem at all.
Nice job.  So does the Pioneer 3200 have a auto oiler or is it manual only. 
Also being a older saw I assume it is reed valve too.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20116
  • Karma: 429
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Pioneer 3200
« Reply #2 on: October 06, 2017, 10:03:48 am »
Never seen one around here. Thanks for sharing.

69-70 - is the info right on here? http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/4670d5b331d03d4488256b000015d000?OpenDocument
REDNECK Saw Repair Getter Done

Offline fossil

  • 6 cube
  • ****
  • Posts: 192
  • Karma: 54
  • Location: Brampton, Ontario
Re: Pioneer 3200
« Reply #3 on: November 17, 2017, 08:53:03 pm »
That saw looks similar to the Poulan 245 but the Pioneer 3200 is 77cc and the 245 is 73cc.   It seems to cut through your wood with no problem at all.
Nice job.  So does the Pioneer 3200 have a auto oiler or is it manual only. 
Also being a older saw I assume it is reed valve too.

Been a while so I didn't see your post Roger.

It has a manual oiler only. The 3270 series have both. It is a reed valve saw. and pretty light for the displacement.
It's more like a Homelite XL-12 than anything else.
To save weight they sealed the top of the oil tank and the PTO side of the fuel tank with a piece of light gauge aluminum. Easy to puncture but both of them are completely covered so they can't get damaged.
It has good power. The downside as many would comment is the use of a primer instead of a choke. The primers go south over time but a collector friend of ours gave me some help on how to repair it and it does work well.
The saw has no idle speed adjust provision on the carb but uses a process (weird) called InjectAire that uses a screw that allows an air leak to adjust the idle speed. I found a combination of that and the idle mix screw worked. Not too easy to pressure and vac test as it's not entirely possible to eliminate the air leak.
I am impressed with the saw as it has very good power. The bar mount is a real oddball but a D096 or a D176 mount can be adapted. I like it enough that I will be keeping my eye open for one of the 3270 series.

I've since fabbed up a plug cover which are usually missing and a spike.

Tim
Like Like x 2 Useful Useful x 1 View List

Offline fossil

  • 6 cube
  • ****
  • Posts: 192
  • Karma: 54
  • Location: Brampton, Ontario
Re: Pioneer 3200
« Reply #4 on: November 17, 2017, 08:54:13 pm »
Never seen one around here. Thanks for sharing.

69-70 - is the info right on here? http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/4670d5b331d03d4488256b000015d000?OpenDocument

I think it is. Pre P series saw.
Tim
Like Like x 1 View List

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4243
  • Karma: 247
  • Location: Carpenter, Wyoming
Re: Pioneer 3200
« Reply #5 on: November 18, 2017, 07:55:11 pm »
Thanks Tim.
PP 505, 475, 445.

Offline old 040

  • 4 cube
  • **
  • Posts: 67
  • Karma: 16
Re: Pioneer 3200
« Reply #6 on: June 13, 2018, 04:22:01 pm »
I fixed up this 3200. Not pretty but tons of torque. It really surprised me.

https://youtu.be/r0wNJnG8DhI
That saw sounds sweet Tim, I've been after the 4.7 cube version for a while now and was lucky enough to win a 3270 off the bay this last Saturday, It's actually the "SC" version, which uses a choke rather than the primer used on the earlier models, pretty stoked to have it on it's way now and should be here before the end of the week, I also have a 14-20 and a 14-50 smaller brother, this series of Pioneers are unique to themselves, I really like my 4 cube jobs and really want to run the 4.7, pretty sure they're basically the same size physically other than CC of coarse.... ;D
Like Like x 2 View List

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1584 Views
Last post October 21, 2011, 07:55:21 pm
by Spike60
1 Replies
439 Views
Last post May 23, 2013, 12:55:10 am
by fordfairlane78
9 Replies
1566 Views
Last post June 26, 2014, 04:48:33 pm
by KilliansRedLeo
2 Replies
358 Views
Last post October 03, 2014, 11:32:49 am
by fossil
8 Replies
833 Views
Last post January 14, 2015, 10:14:53 pm
by Warped5
4 Replies
304 Views
Last post August 16, 2015, 09:26:02 pm
by kb85
2 Replies
244 Views
Last post November 26, 2015, 09:39:30 pm
by Sven Johnson
1 Replies
185 Views
Last post June 29, 2016, 11:52:58 am
by RoyM
9 Replies
639 Views
Last post July 24, 2016, 01:54:18 pm
by Legeance
pioneer 650

Started by 1manband « 1 2 ... 5 6 » Pioneer

51 Replies
626 Views
Last post June 03, 2017, 11:15:03 am
by 1manband