Author Topic: Pioneer 750 bow saw video  (Read 341 times)

0 Members and 0 Guests are viewing this topic.

Offline sawmandave

  • 3 cube
  • *
  • Posts: 20
  • Karma: 6
Pioneer 750 bow saw video
« on: October 03, 2014, 12:17:29 am »
This saw I got a small engine shop , poured gas in it and it ran ! I had to clean out the fuel system but didn't touch carb
Dave
https://www.youtube.com/watch?v=PlOwYa4cHs8&list=UUoj5Pwr6mvuo95qA98_1GGw
"You are an out cast if you are not sawing with a sandcast"

MY DREAM SAW 2400 POULAN BOW SAW

Social Buttons


Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Pioneer 750 bow saw video
« Reply #1 on: October 03, 2014, 08:44:39 am »
Sounds real good!  Big powerhead, rally cuts fast

Offline fossil

  • 6 cube
  • ****
  • Posts: 184
  • Karma: 50
  • Location: Brampton, Ontario
Re: Pioneer 750 bow saw video
« Reply #2 on: October 03, 2014, 11:32:49 am »
Dave,

For you 750 primer you may want to try this. I receive this reply from a fellow collector regarding the carb primers.

What generally fails on the primers is the inlet check valve. Follow the fuel line from the bowl to the bottom of the primer. Unscrew that fitting with a 5/8" (or 9/16") socket. You'll probably find a gooey mess retained by a little U shaped spring. Maybe there will be a felt filter covering it all up. Clean it all out and put some 1/4" carb diaphragm punchings under that spring. I stack 3 or 4 there. Voila!, you should have a working inlet check valve. The outlet check valve is a little coil spring and needle with a tiny o-ring. Sometimes the primer plunger o-ring will leak and spray fuel all over the place.
Tim

 

Related Topics

  Subject / Started by Replies Last post
7 Replies
1559 Views
Last post October 21, 2011, 07:55:21 pm
by Spike60
7 Replies
1177 Views
Last post December 22, 2013, 01:31:52 pm
by dutchsawdoctor
1 Replies
416 Views
Last post May 23, 2013, 12:55:10 am
by fordfairlane78
Pioneer Pics

Started by fossil « 1 2 » Pioneer

12 Replies
1195 Views
Last post November 19, 2014, 10:12:34 am
by KilliansRedLeo
8 Replies
1996 Views
Last post April 02, 2014, 03:38:38 am
by fordfairlane78
9 Replies
1537 Views
Last post June 26, 2014, 04:48:33 pm
by KilliansRedLeo
8 Replies
705 Views
Last post January 14, 2015, 10:14:53 pm
by Warped5
0 Replies
83 Views
Last post July 19, 2015, 07:48:55 pm
by 660magnum
2 Replies
92 Views
Last post September 07, 2016, 05:27:00 pm
by Revpop
3 Replies
34 Views
Last post September 25, 2017, 08:10:47 am
by pete