Author Topic: Craftsman 3.0 358.356070  (Read 2061 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18586
  • Karma: 362
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Craftsman 3.0 358.356070
« on: November 05, 2011, 11:40:56 pm »
 I was able to start taking my new to me project saw apart this evening. Model # 358356070 - Craftsman 3.0 18 in.

So far just pulled all the AV's to see which ones were needing replaced.

Mount PART NUMBER: 27238 Substitution: 530027393
Isolator PART NUMBER: 27236 Substitution: 530042080

IPL  http://parts.sears.com/partsdirect/part-model/Craftsman-Parts/Chainsaw-Parts/Model-358356070/0247/1503220;jsessionid=o2KVwLKD9h-5Y-zp0sO43A**.pdapp402vert1
REDNECK Saw Repair Getter Done

Social Buttons


Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #1 on: November 06, 2011, 10:30:29 pm »
Kevin, pull the muffler on that to verify for me that the Craftsman 3.0 versions were all unplated cyls will you?


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18586
  • Karma: 362
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #2 on: November 07, 2011, 06:39:42 am »
I got a little further yesterday tearing down and checking over very slowly. Will pull muffler.
Looked through plug hole yesterday and carb looking at intake side of piston and exhaust side of cyl.  Looks good so far.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18586
  • Karma: 362
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #3 on: November 07, 2011, 08:11:27 pm »
Mark pulled muffler and it was darker grey inside cylinder.  Does this mean a plated piston then?

Would the 3300 saws all look like this I wonder too. I haven't looked in the 3300 I picked up or the one my dad bought new in 80's.


UPDATE: Yes bare bore and plated piston on the 3.0 grey 3000  ;) ;D and 3300
REDNECK Saw Repair Getter Done

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3745
  • Karma: 133
  • OHIO REDNECK
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #4 on: November 09, 2011, 05:47:53 pm »
Got the new front AV in. Had rest of AV parts on hand and installed. Ran new impulse, tank vent and fuel lines. Being the old ones crumbed at my touch. Gutted muffler and didnt even have to rebuild carb. Runs great, oiler works and ready for it's test session in the woods.

Thanks for the trade  ;), this is a saw I understand and can use.
REDNECK Saw Repair

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2601
  • Karma: 137
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #5 on: November 09, 2011, 07:13:17 pm »
Like I said that one was what my little bud went in the tree biz with maybe 20 years ago .That saw, a pick up with a set of plywood sides and a set of gaffs and a belt . He's came a long way since .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18586
  • Karma: 362
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #6 on: November 09, 2011, 07:41:32 pm »
Like I said that one was what my little bud went in the tree biz with maybe 20 years ago .That saw, a pick up with a set of plywood sides and a set of gaffs and a belt . He's came a long way since .

I found a oem factory dated sticker on it for 1985.   
REDNECK Saw Repair Getter Done

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2601
  • Karma: 137
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #7 on: November 09, 2011, 08:40:04 pm »
That would be about right .He bought it second hand from a tree service he used to work for . As it turned out the owner of said business is now his foremen on the jobs .

As he got some more money he did end up with a few more saws namely a little Echo trim saw and an 038 mag  both of which I own now .Geeze I kept the Stihl running for 10 years on a wing and a prayer .I became so familar with that saw I could disassemble it blindfolded .Still runs though and runs well ---for a moment . ;D

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3745
  • Karma: 133
  • OHIO REDNECK
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #8 on: November 10, 2011, 07:32:40 pm »
Test cuts made. Good to go.   8)

REDNECK Saw Repair

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1125
  • Karma: 78
Re: Craftsman 358.356070 = grey Poulan 3000
« Reply #9 on: May 01, 2012, 04:53:50 pm »
What is the bar mount for this saw? A041? Have one at the shop in mint con that needs a bar.

 

Related Topics

  Subject / Started by Replies Last post
31 Replies
2123 Views
Last post August 22, 2017, 01:51:25 pm
by Cut4fun .
2 Replies
1020 Views
Last post July 18, 2012, 01:40:02 pm
by Cut4fun .
1 Replies
302 Views
Last post October 18, 2012, 04:02:23 pm
by Cut4fun .
26 Replies
737 Views
Last post March 05, 2013, 06:49:29 pm
by 3000 FPS
90 Replies
1288 Views
Last post November 12, 2017, 02:42:56 pm
by Cut4fun .
6 Replies
266 Views
Last post October 16, 2013, 03:40:39 pm
by KilliansRedLeo
6 Replies
191 Views
Last post November 12, 2013, 05:21:48 pm
by 660magnum
3 Replies
173 Views
Last post November 13, 2013, 10:53:09 pm
by jcsmith
3 Replies
115 Views
Last post November 23, 2013, 04:53:27 pm
by loubell
6 Replies
382 Views
Last post November 27, 2013, 02:27:31 pm
by Cut4fun .