Author Topic: Craftsman 358.356070 3.0  (Read 2211 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20425
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 3.0 358.356070
« Reply #50 on: July 18, 2016, 07:36:16 pm »
Had changed my mind. The PP365 tank went on the craftsman today with small carb and intake.
Put the 3450 big intake, big carb and tank on 365.

3.0 up and cutting again. 365 has tank on just not buttoned up before I got the supper bell.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4279
  • Karma: 249
  • Location: Carpenter, Wyoming
Re: Craftsman 3.0 358.356070
« Reply #51 on: July 19, 2016, 12:51:23 am »
Had changed my mind. The PP365 tank went on the craftsman today with small carb and intake.
Put the 3450 big intake, big carb and tank on 365.

3.0 up and cutting again. 365 has tank on just not buttoned up before I got the supper bell.

So you have a 365 set up basically like the 3750.
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20425
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 3.0 358.356070
« Reply #52 on: July 19, 2016, 12:40:20 pm »
Had changed my mind. The PP365 tank went on the craftsman today with small carb and intake.
Put the 3450 big intake, big carb and tank on 365.

3.0 up and cutting again. 365 has tank on just not buttoned up before I got the supper bell.

So you have a 365 set up basically like the 3750.

Yes c&i tank, but will be 365 covers and filter.
REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4279
  • Karma: 249
  • Location: Carpenter, Wyoming
Re: Craftsman 3.0 358.356070
« Reply #53 on: July 19, 2016, 06:45:03 pm »
Nice.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20425
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 3.0 358.356070
« Reply #54 on: July 20, 2016, 06:31:43 pm »
3.0 3.3 2.8 3300 3000 305 335 2800 2700 will all take the 365 3500 330 380 3750 3450 tanks if need me. Can even run the small intake and small carb with the 330 tank set up IMO if you still wanted.

3.0 GREY one with 365 tank with small carb and intake.  Just need the small tank air filter cover brace.

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20425
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.356070 3.0
« Reply #55 on: June 05, 2018, 09:19:52 am »
Had someone asking for pics of the grey craftsman poulans I took on trade.  The one with cover if correct for saw comes back to 49cc 3.0. Other one no clue yet without measuring. 
Did find a nice surprise on the one with no cover. Pulled and put in bin. New HDA164 carb.  8)



REDNECK Saw Repair Getter Done

Offline wberthold

  • pruner
  • *
  • Posts: 1
  • Karma: 0
Re: Craftsman 358.356070 3.0
« Reply #56 on: July 22, 2018, 12:31:35 am »
Hi - hoping someone can help me. I have a Craftsman 358.356070-3.0 unit where I need to replace the starter pull rope. I took apart the starter pulley, but the starter spring moved.  Does anyone have any photos on how the spring is supposed to be positioned before installer the starter pulley?  (Maybe a pic?)  Any help would be greatly appreciated.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20425
  • Karma: 446
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Craftsman 358.356070 3.0
« Reply #57 on: July 22, 2018, 08:47:13 am »
I dont have any pics on hand. If spring is still in recoil. Just put the pulley back in.  The pulley should set in the  and align itself if I recall right on these. Always slowly release the spring tension before removing the pulley.

Here is the IPL.  http://www.klippo.com/ddoc/POUI/POUI2000_USen/POUI2000_USen__530066768.pdf
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1084 Views
Last post July 18, 2012, 01:40:02 pm
by Cut4fun .
99 Replies
1684 Views
Last post August 30, 2018, 10:17:12 am
by Cut4fun .
6 Replies
310 Views
Last post October 16, 2013, 03:40:39 pm
by KilliansRedLeo
3 Replies
190 Views
Last post November 13, 2013, 10:53:09 pm
by jcsmith
5 Replies
205 Views
Last post February 11, 2014, 03:36:38 pm
by Cut4fun
3 Replies
632 Views
Last post July 13, 2015, 12:41:04 am
by Eccentric
5 Replies
343 Views
Last post March 06, 2017, 09:49:31 pm
by 3000 FPS
16 Replies
346 Views
Last post February 15, 2016, 11:25:49 pm
by dannyupsolate
1 Replies
292 Views
Last post April 03, 2016, 12:34:02 pm
by Cut4fun .
4 Replies
86 Views
Last post April 11, 2018, 03:05:30 pm
by Revpop