Author Topic: Poulan small Rollernose bar  (Read 465 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3768
  • Karma: 138
  • OHIO REDNECK
Poulan small Rollernose bar
« on: June 22, 2014, 12:21:04 pm »
Poulan small rollernose bar.

Aaron I just got to save that stuff you posted from bay.  I think that would make a badazz set up. 3/8 PS on a roller nose bar top handle 38cc poulan. 

Can you say bumblebee class we used to race.  40cc under top handles only.
REDNECK Saw Repair

Social Buttons


Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 171
Re: Poulan small Rollernose bar
« Reply #1 on: June 22, 2014, 11:06:38 pm »
Sweet! What's the diameter?

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4231
  • Karma: 246
  • Location: Carpenter, Wyoming
Re: Poulan small Rollernose bar
« Reply #2 on: June 22, 2014, 11:44:16 pm »
I have not seen a small roller nose for the top handle saws before.   
I probably did not pay attention.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19965
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan small Rollernose bar
« Reply #3 on: June 23, 2014, 03:13:13 pm »
Sweet! What's the diameter?

I have no clue being I only seen the pics  posted above.  Maybe Aaron knows?
REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1128
  • Karma: 124
  • Location: Hayesville, NC
Re: Poulan small Rollernose bar
« Reply #4 on: June 23, 2014, 09:49:33 pm »
I've got a Partner bar and an Oregon bar ( K095 I'm pretty sure)that size both have a 2" roller nose.  My guess is that is whats on that bar.
Shep
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19965
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan small Rollernose bar
« Reply #5 on: June 25, 2014, 01:03:37 pm »
I've got a Partner bar and an Oregon bar ( K095 I'm pretty sure)that size both have a 2" roller nose.  My guess is that is whats on that bar.
Shep

I forgot all about that small mount pioneer bar you turned me onto Shep.  I ended up making it work on 346 K095 mount with 60dl.   

Maybe it could  have been made to work on the little poulans too.  I sort of fill it would be alittle big for the A041. But not having it in hand I wouldnt be able to tell anymore.

I dont think I ever did measure dia of nose though.

1st pic as Shep found it.



after












REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1128
  • Karma: 124
  • Location: Hayesville, NC
Re: Poulan small Rollernose bar
« Reply #6 on: June 25, 2014, 09:46:21 pm »
That Oregon bar is an A086 it's pretty narrow in the tail, has oil hole like A095 K095.   
Shep
Informative Informative x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2105
  • Karma: 215
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan small Rollernose bar
« Reply #7 on: June 28, 2014, 07:06:03 pm »
IIRC that bar does have a 2" roller.  I need to renew my efforts to obtain the NOS example of these from a certain friend in Virginia.  It would indeed be the cat's azz on a S25-CVA.  I'm having one of mine ported by Randy Evans in September.  That'd be the saw I'd put that bar on.

I have a 12" RN on a Montgomery Wards PowerKraft 2.8 branded Remington SL-9.  Now that's a little RN.  P/C are roached.  May have a line on an NOS set to get that saw back up and running.  If I do I'll probably try to run 63PS on it in place of the 'regular' 3/8" pitch chain that's on it now.


-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Useful Useful x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2105
  • Karma: 215
  • Magnesium and Iron.
  • Location: Northern California.
Re: Poulan small Rollernose bar
« Reply #8 on: June 28, 2014, 07:11:02 pm »
I've got a Partner bar and an Oregon bar ( K095 I'm pretty sure)that size both have a 2" roller nose.  My guess is that is whats on that bar.
Shep

I forgot all about that small mount pioneer bar you turned me onto Shep.  I ended up making it work on 346 K095 mount with 60dl.   

Maybe it could  have been made to work on the little poulans too.  I sort of fill it would be alittle big for the A041. But not having it in hand I wouldnt be able to tell anymore.

I dont think I ever did measure dia of nose though.

1st pic as Shep found it.



after









I have a couple of these bars off of Pioneers as well.  IIRC they are 16", 18", and 22" or so.  The 22" bar just came to me on a Pioneer 11-60.  It's got surface rust, but the roller is free and it'll clean up fine.

-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 19965
  • Karma: 418
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan small Rollernose bar
« Reply #9 on: September 19, 2014, 02:29:50 pm »
Nice rollernose bar and whole saw with powersharp  75. Sears Explorer


REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
642 Views
Last post February 27, 2011, 06:26:04 pm
by RedBaron
56 Replies
1754 Views
Last post August 12, 2015, 08:22:38 pm
by Eccentric
1 Replies
320 Views
Last post November 03, 2011, 05:35:36 pm
by Cut4fun .
3 Replies
315 Views
Last post February 04, 2012, 10:28:30 am
by Cut4fun
10 Replies
1035 Views
Last post August 22, 2012, 06:55:02 pm
by Al Smith
15 Replies
1064 Views
Last post April 30, 2014, 11:58:07 pm
by Eccentric
4 Replies
225 Views
Last post September 24, 2015, 04:13:33 pm
by Cut4fun .
2 Replies
146 Views
Last post October 31, 2017, 08:38:08 pm
by Cut4fun .
3 Replies
80 Views
Last post November 10, 2015, 11:28:35 am
by dannyupsolate
9 Replies
302 Views
Last post November 24, 2016, 04:46:50 pm
by Eccentric