Author Topic: 65cc stock saw testing 10x10 cuts  (Read 2071 times)

0 Members and 0 Guests are viewing this topic.

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1835
  • Karma: 162
Re: 65cc stock saw testing 10x10 cuts
« Reply #50 on: August 10, 2014, 03:23:17 am »
The 665 is strong. Cutting faster than a ported 562 is no slouch.  Maybe I should have bought one of the 665s.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1035
  • Karma: 107
  • Location: Hayesville, NC
Re: 65cc stock saw testing 10x10 cuts
« Reply #51 on: August 10, 2014, 08:19:25 am »
Same here!  Looking forward to seeing one after porting.
Shep

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17969
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #52 on: August 10, 2014, 10:53:12 am »
I guess there might not be a reason to run that stock 562 now in the 12x12 dry cant to compare to the other stock unbroken in 665, eh dexterday  ;).  It could be ugly.  :D
REDNECK Saw Repair Getter Done

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: 65cc stock saw testing 10x10 cuts
« Reply #53 on: August 10, 2014, 11:47:23 am »
So, let me get this in my tiny brain, one of those stock Solo 665s I sold out ran a ported 562XP on the third run (only fair run) by 4 tenths! :P
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1125
  • Karma: 78
Re: 65cc stock saw testing 10x10 cuts
« Reply #54 on: August 10, 2014, 11:49:19 am »
I know here a stock 562 can't run with a stock 365. Maybe somewhere, but not here.
We had a stock 550 and stock 562 timed in 8x8 poplar. 3 cuts.

562 7.85 secs
550 10.05 secs

ported 152 Efco, same chain as 550  7.65 secs

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17969
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #55 on: August 10, 2014, 12:38:24 pm »
Like I have said before. That demo 562xp I ran I just thought it wasnt set right or still on 1st tank or something.  Was just real peaky IMO and easy to pull down in test cuts.  Maybe I was just spoiled over the years with good running saws and had way to high of expectations.

Now the stock 550xp and 545 I will take over stock 346 50cc here.  I ran 3/8 on all of them. 550 545 were just better IMO.
REDNECK Saw Repair Getter Done

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1125
  • Karma: 78
Re: 65cc stock saw testing 10x10 cuts
« Reply #56 on: August 10, 2014, 01:11:43 pm »
I get alot of Husky guys in the shop to buy bars, chains,etc. Seems to be a 50/50 split on the 550. Some prefer their old 346, some the new 550. We had a stock 545 along with the 550 and 562 to run. It may have been a bad saw because it was a very poor runner. MS241 made it look bad.

Bottom line for us, 500 series Huskies have been great for our Stihl sales numbers.

Anyway my vote is for the Solo. I know how strong my 675 was.

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: 65cc stock saw testing 10x10 cuts
« Reply #57 on: August 15, 2014, 09:48:53 pm »
I guess there might not be a reason to run that stock 562 now in the 12x12 dry cant to compare to the other stock unbroken in 665, eh dexterday  ;).  It could be ugly.  :D

I will try and get a video tomorrow after work or Sunday of my stock 665 (only 2 tanks ran through it), a stock 562xp (probably 50 tanks or so), and my ported MS 362C-M (6 tanks).

My email quit working apparently, I have since changed it to a working email. Sorry for such a long wait on a response. 

If I post a video here, will it embed it automatically?  Or is there a selection up top that I should put it in? 
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17969
  • Karma: 338
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #58 on: August 15, 2014, 10:08:55 pm »
On youtube videos just click their share and copy and paste that link here. it is all automatic after that.  If it dont work right for you I will fix or someone else.

Thanks for update.
REDNECK Saw Repair Getter Done

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1035
  • Karma: 107
  • Location: Hayesville, NC
Re: 65cc stock saw testing 10x10 cuts
« Reply #59 on: August 15, 2014, 10:40:20 pm »
Looking forward to it.  Thanks.  665
Shep

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
1589 Views
Last post May 14, 2012, 12:29:29 pm
by chainsman1
3 Replies
363 Views
Last post April 12, 2012, 06:17:11 pm
by EHP
7 Replies
767 Views
Last post February 19, 2015, 07:05:49 pm
by mdavlee .
1 Replies
418 Views
Last post September 29, 2012, 09:23:33 pm
by 660magnum
5 Replies
387 Views
Last post January 03, 2014, 06:28:33 am
by pete
3 Replies
206 Views
Last post February 17, 2014, 09:08:39 am
by KilliansRedLeo
9 Replies
1815 Views
Last post March 28, 2016, 10:51:30 pm
by 3000 FPS
2 Replies
238 Views
Last post September 23, 2014, 08:50:25 pm
by weimedog
6 Replies
111 Views
Last post December 04, 2015, 08:34:15 pm
by Cut4fun .
2 Replies
85 Views
Last post July 12, 2017, 07:19:21 pm
by Cut4fun .