Author Topic: 036 Pro  (Read 222 times)

0 Members and 0 Guests are viewing this topic.

Offline brettl

  • 6 cube
  • ****
  • Posts: 179
  • Karma: 7
036 Pro
« on: May 07, 2014, 06:15:02 pm »
Just got my 036 Pro. ;D Has a good air filter but I want a few spares for days in the woods. Have any of you tried these Hutzl filters? They have some fuel and oil caps reasonable to. Any of you tried those? If not these, is there a better aftermarket source for air filters?

Thanks everyone.
Sthil Man. 011AV, 015, 020, 020, 024, 025, 026, 028 WB(2), 028AV, 028 Super, 029 Super(2), 039, 041, 192TC, 200T, 250, 260, 390, 440, 441

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22492
  • Karma: 586
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 036 Pro
« Reply #1 on: May 07, 2014, 07:01:48 pm »
Never tried hutzl 036 stuff.

http://www.hlsproparts.com/   10% off order using code for this site too.

I have OEM stihl 044 fuel cap if the same as 036. Have a stihl 440 flippy cap too.

REDNECK Saw Repair Getter Done

Offline brettl

  • 6 cube
  • ****
  • Posts: 179
  • Karma: 7
Re: 036 Pro
« Reply #2 on: May 07, 2014, 07:20:06 pm »
Thanks for the link Kevin. That air filter they sell looks identical to the Hutzl and Hutzl does sell wholesale as well. I may order one of each and see if they're the same part. $5 cheaper from Hong Kong and free shipping. $20 to $25 cheaper than OEM. I want to support my dealer but that's to much difference.

Still looking for anyone who's used the Hutzl air filters?
Sthil Man. 011AV, 015, 020, 020, 024, 025, 026, 028 WB(2), 028AV, 028 Super, 029 Super(2), 039, 041, 192TC, 200T, 250, 260, 390, 440, 441

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: 036 Pro
« Reply #3 on: May 07, 2014, 07:42:36 pm »
the 036 filter from the dealer here is about $17 after taxes :-\
when I grow up, i wanna be an adult.

Offline brettl

  • 6 cube
  • ****
  • Posts: 179
  • Karma: 7
Re: 036 Pro
« Reply #4 on: May 07, 2014, 07:44:08 pm »
$20+ here, that's why I'm asking about aftermarket? Anyone used Hutzl?
Sthil Man. 011AV, 015, 020, 020, 024, 025, 026, 028 WB(2), 028AV, 028 Super, 029 Super(2), 039, 041, 192TC, 200T, 250, 260, 390, 440, 441

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4531
  • Karma: 283
  • Location: Carpenter, Wyoming
Re: 036 Pro
« Reply #5 on: May 07, 2014, 09:39:58 pm »
If you order the Hutzl filters let me know what you think of them.   I have a couple of 036's myself.
PP 505, 475, 445.

Offline brettl

  • 6 cube
  • ****
  • Posts: 179
  • Karma: 7
Re: 036 Pro
« Reply #6 on: May 07, 2014, 09:53:12 pm »
I probably will. They're only $7 or $8 and free shipping. I'll give them a shot. Meanwhile, I think I'll go to a fabric store to try to match up the flock we use. Once one is worn out, I don't think it would be to hard to apply adhesive to the plastic only and put the new flocking on. Although instrumental to the durability of our saws, it's not rocket science either.

We subject our off road rc cars and trucks to tremendous amounts of dirt and dust on the track and you'd be surprised how much experimenting has taken place at one time or another. The neatest I've seen is those colored "Ace" type bandages that wrap and stick to themselves. Many racers use them as a 1st stage filter to catch the big stuff. This bandage is somewhat tacky to the touch and yet it doesn't collect excess debris like you would suspect. It's pretty open so it doesn't restrict airflow. Something to try in dirty cutting on a Stihl 441 type filter? Maybe so. It's cheap, and takes seconds to cut, wrap and press.
Sthil Man. 011AV, 015, 020, 020, 024, 025, 026, 028 WB(2), 028AV, 028 Super, 029 Super(2), 039, 041, 192TC, 200T, 250, 260, 390, 440, 441