Author Topic: Dolmar 143 bars  (Read 197 times)

0 Members and 0 Guests are viewing this topic.

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Dolmar 143 bars
« on: August 16, 2013, 07:39:38 pm »
Recently aquired 4 143 power heads but only 1 with a bar/chain and only a 20"! :( would like to find a 36" but am interested in anything longer than 24".  I might be offering up a couple of them to sell once I get them going as well
Trapped in time, surrounded by evil, low on gas

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22480
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 143 bars
« Reply #1 on: August 16, 2013, 08:04:06 pm »
D033 bar mount it shows. http://www.acresinternet.com/cscc.nsf/BMP/19?OpenDocument

Which is same bar mount on the 166's I ran. I just used large stihl mounts. Like on 084 088 880 075 076 etc.
REDNECK Saw Repair Getter Done

Offline cowroy

  • 4 cube
  • **
  • Posts: 62
  • Karma: 2
Re: Dolmar 143 bars
« Reply #2 on: August 16, 2013, 09:05:00 pm »
I was told that the oilier wholes don't line up on the large mount stihl bars. Do you know CFF?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22480
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 143 bars
« Reply #3 on: August 17, 2013, 08:10:30 am »
On my 166 most of the oiler holes lined up on the bars with bar mount oiler area. Some if off I would just match hole size and drill another oiler hole.  1 min job
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22480
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 143 bars
« Reply #4 on: August 17, 2013, 08:12:41 am »
Thinking about it I know I ran a stihl bar on a 084 and 166 switching back and forth.
REDNECK Saw Repair Getter Done

Offline cowroy

  • 4 cube
  • **
  • Posts: 62
  • Karma: 2
Re: Dolmar 143 bars
« Reply #5 on: August 17, 2013, 11:07:58 am »
That's great news cause, it is a lot easier to find long large mount stihl bars than long Dolmar Bars. I got luky and mine came with a 36" Windsor in great shape, but I would like a 48" or 50" just to have  ;D

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: Dolmar 143 bars
« Reply #6 on: August 19, 2013, 04:31:42 am »
Thanks for the info guys! I will keep my eye out for stihl large mount bars as well.
Trapped in time, surrounded by evil, low on gas

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: Dolmar 143 bars
« Reply #7 on: September 22, 2013, 02:04:53 am »
I recently picked up a 36" bar/chain but medium mount stihl.....has enough material to be machined out to fit.....should I have it ground out or should I wait for a proper bar? Got it cheap but its labeled made in germany & is to tough of material for my bits.....machine shop should be able to do it...opinions?
Trapped in time, surrounded by evil, low on gas

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22480
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Dolmar 143 bars
« Reply #8 on: September 22, 2013, 10:14:38 am »
Here's a idea for you. I knew a guy that turned down the shoulders on the 2 bar studs on a stihl 088 to run the 066 mount bars.
 I had a dolmar 166 done the same way to run large mount husky bars too.
Saves a little work.
REDNECK Saw Repair Getter Done

Offline fordfairlane78

  • 6 cube
  • ****
  • Posts: 160
  • Karma: 16
  • Location: Valley Center,KS
Re: Dolmar 143 bars
« Reply #9 on: September 27, 2013, 01:45:43 am »
Didn't catch that last post until this morning and that is a great idea! I have already removed the studs and I will machine the shoulders down in the morning. ....the chain tensioner is still to large of a pin but I will hit the bone pile for something that may work.... Thanks again!
Trapped in time, surrounded by evil, low on gas

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
398 Views
Last post March 20, 2011, 08:33:14 pm
by Cut4fun .
0 Replies
146 Views
Last post May 10, 2011, 08:52:37 pm
by mdavlee
1 Replies
914 Views
Last post April 16, 2012, 05:31:52 pm
by Cut4fun .
Bow Bars

Started by jmester « 1 2 » Stihl

15 Replies
2083 Views
Last post July 22, 2012, 10:36:25 am
by jmester
Poulan Bars OEM

Started by Cut4fun . « 1 2 3 » Poulan

21 Replies
648 Views
Last post December 28, 2020, 09:45:27 am
by Cut4fun .
4 Replies
318 Views
Last post December 05, 2014, 01:20:49 pm
by bigblackdodge
17 Replies
900 Views
Last post December 02, 2013, 03:51:23 pm
by jmester
12 Replies
431 Views
Last post December 27, 2013, 10:04:43 am
by Cut4fun .
0 Replies
124 Views
Last post January 01, 2014, 07:28:04 pm
by stihls066
8 Replies
300 Views
Last post January 23, 2019, 09:20:10 pm
by trappermike