Author Topic: Mall 7H bar & chain  (Read 421 times)

0 Members and 0 Guests are viewing this topic.

Offline super44

  • 6 cube
  • ****
  • Posts: 219
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Mall 7H bar & chain
« on: May 12, 2011, 08:28:18 pm »
I have a Mall 7h that needs a bar, chain and tensioner.  I am in NW Wisconsin.  There are a couple other issues but I will deal with that if I can get the bar etc.

Thanks

super44

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22492
  • Karma: 586
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Mall 7H bar & chain
« Reply #1 on: May 12, 2011, 09:01:20 pm »
Just so you know if you didnt already. Chainsaw collectors site might have some luck with that mall stuff in their wanted section.

link below.

http://www.chainsawcollectors.se/phpbb3/viewforum.php?f=4&sid=b33bf5389a814ca73e6f7fa81cc1d349
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22492
  • Karma: 586
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Mall 7H bar & chain
« Reply #2 on: May 13, 2011, 11:35:45 pm »
Sending you a # to call of Mall 7 stuff for sale.
REDNECK Saw Repair Getter Done

Offline super44

  • 6 cube
  • ****
  • Posts: 219
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Mall 7H bar & chain
« Reply #3 on: May 14, 2011, 08:10:53 am »
Just so you know if you didnt already. Chainsaw collectors site might have some luck with that mall stuff in their wanted section.

link below.

http://www.chainsawcollectors.se/phpbb3/viewforum.php?f=4&sid=b33bf5389a814ca73e6f7fa81cc1d349

I was not aware of that, I will check it out. Thanks.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Mall 7H bar & chain
« Reply #4 on: May 14, 2011, 09:58:48 am »
I have no idea where you at but in the past these old monster things would occasionally show up at a local  farm auction .They usually didn't fetch too much money .Around here they ran 4 and 5 foot bars back in the day which was mid 50's early 60's  on the model 7's

Bryce S in Washington who sells on flea bay under "cheap chainsaw parts  "has a selection of parts if that helps you out any .

Offline super44

  • 6 cube
  • ****
  • Posts: 219
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Mall 7H bar & chain
« Reply #5 on: May 15, 2011, 09:53:22 am »
I hace a search on Ebay and cheap chainsaw parts  comes up some some of it.  I'm in NW Wisconsin. I paid 33.00 for the power head, tranny and grab handle.  It has sat a long time and needs to be completely torn down for some major TLC.  I have seen the parts I need but the shipping cost has made the parts to expensive.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Mall 7H bar & chain
« Reply #6 on: May 15, 2011, 11:18:05 am »
You're just going to have to be patient for parts for that behemouth thing . They pop up from time to time on flea bay .The chain would probabley be one of the hardest things to find .

That is about the most weird design you can imagine .A portion of the cutting tooth is on one link of the chain while the other part is on another link .Large too ,like 9/16 or 5/8" size .

I've got I think a model 12 in one of my sheds which is very low on my list of restorations .If I can get a good close up of that chain I'll post it .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Mall 7H bar & chain
« Reply #7 on: May 16, 2011, 06:12:32 pm »
I've got some pictures of that odd ball chain .I doubt it's the size for a model 7 .This is called improved planer chain .

This is 9/16" chain ,part of the cutter is on the tie strap .the other on the drive link . I imagine the model 7 takes 3/4" chain .

The old saw is small for a Mall being a tad over 4 cubic inch .Model 12

Offline super44

  • 6 cube
  • ****
  • Posts: 219
  • Karma: 8
  • I have a really big Johnson.
  • Location: NW Wis
Re: Mall 7H bar & chain
« Reply #8 on: May 21, 2011, 03:42:03 pm »
That chain looks like it has seen the file many times.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Mall 7H bar & chain
« Reply #9 on: May 21, 2011, 08:10:21 pm »
Oh sure it's gone but remember that saw is 60 years old and most likely has not ran for 30 plus years .

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
826 Views
Last post April 26, 2011, 04:43:54 pm
by rick
5 Replies
812 Views
Last post April 29, 2011, 02:16:53 am
by Bill G
5 Replies
618 Views
Last post January 31, 2012, 10:10:59 pm
by Al Smith
15 Replies
1148 Views
Last post July 03, 2012, 11:32:20 am
by Cut4fun .
53 Replies
3017 Views
Last post February 03, 2012, 05:21:58 pm
by Cut4fun
3 Replies
419 Views
Last post April 12, 2012, 06:17:11 pm
by EHP
0 Replies
71 Views
Last post October 30, 2012, 11:24:52 pm
by Roanoker494
6 Replies
349 Views
Last post November 05, 2013, 07:06:01 am
by 038magnum
0 Replies
53 Views
Last post September 04, 2016, 11:59:10 pm
by chainsawlady
8 Replies
193 Views
Last post May 02, 2019, 01:48:14 pm
by Philbert