Author Topic: Poulan rim drive drums  (Read 189 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Poulan rim drive drums
« on: December 15, 2013, 05:00:42 pm »
-I need a rim-drive clutch drum for a 3400-4000/PP375-395 series Poulan.  They're on feebay, but I like dealing with people I know if possible.  I also like trades. 8)

-I also need a rim-drive drum for a 245/306 Poulan.  Same part was also used on the 4200/5200 CounterVibes.

-Also would like to get a rim-drive drum for a PoulanPro 295/4620 series saw. I believe a rim-drive drum for a 2700, 2750 or 2900 is the same.

-May be interested in a good 3/8-LP spur drum for a PP295/4620/etc if a used rim-drive doesn't pan out (at least until I break down and buy a new rim-drive drum).


Got things to trade...

Share on Facebook Share on Twitter


Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan rim drive drums
« Reply #1 on: December 15, 2013, 05:51:36 pm »
Mr. Aaron sir.

I have bunches of rims but don't have part numbers if you have dimensions I could probably help ya out.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan rim drive drums
« Reply #2 on: December 15, 2013, 06:46:32 pm »
Mr. Aaron sir.

I have bunches of rims but don't have part numbers if you have dimensions I could probably help ya out.

I can measure the spur drums that I have now and get back to you.  I can also give you #'s for the drums that I'm looking for.



23706X is the Oregon # for the 245/306 rim drive drum.  530048001 is the Poulan # for that drum.



28187 is the Oregon # for the 3400-4000 rim drive drum.  530048069 is the Poulan # for the rim drive drum.


41569 is a Windsor and Oregon # that I've found for a 3/8-LP spur drum for the PP295.


41726X is the Oregon # for the PP295 rim drive drum.  PA475SCJ7N is the GB # for this rim drive drum.  530069316 is the Poulan # for this rim drive drum.


The drums for the PoulanPro 295 are the same as used on Husky 36/136/41/141 chainsaws.


Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan rim drive drums
« Reply #3 on: December 15, 2013, 07:29:44 pm »
The PP295 drums have an outside diameter of 2.625".  The crankshaft has a .3937" diameter and takes a 37325 bearing.

The 3400-4000 drums have an outside diameter of 3.125".  The crankshaft has a .500" diameter, and takes the common 11893 bearing.

The 245/306 drums have a 3.3125" outside diameter.  The crankshaft has a .5625" diameter and takes a 12068 bearing.


These measurements were taken out of Cutters Choice and Oregon catalogs.  The bearing #'s are Oregon part #'s.

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan rim drive drums
« Reply #4 on: December 16, 2013, 12:05:37 am »
Cool I'll do some digging in the morning

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan rim drive drums
« Reply #5 on: December 16, 2013, 12:13:13 pm »
Do you want just the drums? Or need rims to match also

Offline fastleo151

  • 5 cube
  • ***
  • Posts: 103
  • Karma: 8
Re: Poulan rim drive drums
« Reply #6 on: December 16, 2013, 01:38:33 pm »
I didn't find anything in my stash that will fit,  but I cab get the two available kits for you from work

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan rim drive drums
« Reply #7 on: December 16, 2013, 02:26:08 pm »
Do you want just the drums? Or need rims to match also

I didn't find anything in my stash that will fit,  but I cab get the two available kits for you from work

Which ones can you get at work?  Since my last post here, A fellow on AS contacted me saying that he has the 3400-4000 and 306/245 rim drive drums for me.  Looks like I'm set for those two. 

That just leaves the 41726X drum for the PP295.  I've found a few on feebay.  Prices vary wildly.  Can you get that one, and if so how much can you get it for?  I'd probably also need the 37325 bearing for that one. 

It should come with a .325-7 small 7-spl rim.  I could also use a 3/8-7 small 7-spl rim for that.  I want to try different chain pitches on that saw.

Can you get the 41569 3/8-LP spur drum?

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2112
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Poulan rim drive drums
« Reply #8 on: December 16, 2013, 04:43:24 pm »
The 245/306 and 3400-4000 rim drive drums are taken care of.

All I need now is the drum for the PP295.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan rim drive drums
« Reply #9 on: December 16, 2013, 04:53:01 pm »
Parts needed . . .

"The PP295 drums have an outside diameter of 2.625".  The crankshaft has a .3937" diameter and takes a 37325 bearing."
".325-7 small 7-spl and 3/8-7 small 7-spl rim"

"#41569 3/8-LP spur drum" with the dimensions in the first line
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
200 Views
Last post April 14, 2011, 09:41:02 pm
by man of stihl
6 Replies
746 Views
Last post February 07, 2018, 10:07:18 am
by Cut4fun .
23 Replies
701 Views
Last post August 21, 2017, 05:30:21 pm
by Cut4fun .
6 Replies
205 Views
Last post February 24, 2014, 10:30:11 am
by srcarr52
1 Replies
67 Views
Last post February 01, 2015, 10:18:33 am
by Cut4fun .
24 Replies
620 Views
Last post September 04, 2015, 12:42:20 pm
by Cut4fun .
9 Replies
341 Views
Last post September 14, 2015, 01:12:09 am
by mcbob
0 Replies
125 Views
Last post February 17, 2016, 06:38:53 pm
by scwoody
0 Replies
50 Views
Last post January 06, 2017, 09:20:24 pm
by aclarke
4 Replies
51 Views
Last post December 15, 2017, 06:21:55 am
by Al Smith