Author Topic: Palm damage  (Read 128 times)

0 Members and 1 Guest are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18262
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Palm damage
« on: November 06, 2015, 07:47:04 pm »
Guy wonder if it could be welded up or just get another case.  Dawg mount gone as you can see.

REDNECK Saw Repair Getter Done

Social Buttons


Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4037
  • Karma: 222
  • Location: Carpenter, Wyoming
Re: Palm damage
« Reply #1 on: November 06, 2015, 09:16:00 pm »
Is that just busted out or is it corroded.
PP 505, 475, 445.

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Palm damage
« Reply #2 on: November 06, 2015, 09:32:03 pm »
Palm and Yucca are highly corrosive. I have my guys break down the saws and pull clutches after doing Palm removals for thorough cleaning and spray with LPS or WD Nasty chit!!

Don't think I'd mess with trying to weld that one... aftermarket case might be more cost effective



Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Palm damage
« Reply #3 on: November 06, 2015, 09:34:16 pm »
What saw is that Kev?  May have a good case here

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18262
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Palm damage
« Reply #4 on: November 06, 2015, 09:39:09 pm »
I think it is a 066.  Dont worry about it Adam IMO.

The guy bought 2 for $20 apiece. 
REDNECK Saw Repair Getter Done

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 170
Re: Palm damage
« Reply #5 on: November 06, 2015, 10:18:42 pm »
Hate seeing damage like that. Totally preventable...

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 18262
  • Karma: 346
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Palm damage
« Reply #6 on: November 06, 2015, 10:23:35 pm »
I think there is more there damaged then he realizes. Look around the brake band area.
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4037
  • Karma: 222
  • Location: Carpenter, Wyoming
Re: Palm damage
« Reply #7 on: November 06, 2015, 10:45:11 pm »
I do not believe I would weld that either.   Just too much corrosion. 
PP 505, 475, 445.

Offline Cat-Face Timber

  • 4 cube
  • **
  • Posts: 70
  • Karma: 8
Re: Palm damage
« Reply #8 on: November 18, 2015, 07:03:32 pm »
So cutting up a Palm Tree caused this?
WOW..

MIGHTY HUSKY 235
BESTEST SAW EVER!

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6386
  • Karma: 231
  • For The Love Of Chainsaws
  • Location: NCO
Re: Palm damage
« Reply #9 on: November 18, 2015, 07:46:41 pm »
You need to disassemble the chain side of your chainsaw and thoroughly clean all the mechanism after cutting into palm.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
12 Replies
144 Views
Last post January 26, 2014, 06:07:49 pm
by bustedknuckles
0 Replies
90 Views
Last post January 12, 2014, 05:35:35 pm
by Cut4fun
7 Replies
102 Views
Last post August 25, 2017, 06:40:44 am
by jmester