Author Topic: Central Ohio Spring GTG June 2  (Read 1594 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4305
  • Karma: 188
  • OHIO REDNECK
Central Ohio Spring GTG June 2
« on: February 02, 2012, 06:55:33 am »
Talked to Bill wkpoor last night on the phone and he gave the OK to pass his GTG info out to those interested.

   ((( I've got the bug to hold another GTG only this time in warmer weather. So I'm posting for a show of hands for anyone interested in a late May date. Somewhere near Memorial day was my thoughts. It will be pretty much like my others with 8x8 and 10x10 inch racing cants and a variety of rounds to cut on. 1 Day event with gathering about 9AM, general cutting and bs, lunch about noonish, and racing in the afternoon. )))   Amanda, OH

I have been to his last 3 GTG's and Bill puts on a good one. Usually hotstart over wood and 1 cut smaller saws to 2c uts depending on amount of wood.

I plan on going and told him I would run the racing portion for him if he liked.

Just putting in the tentative date in heading and post for you Bill. June 2

REDNECK Saw Repair

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Central Ohio Spring GTG
« Reply #1 on: February 02, 2012, 07:46:53 am »
Sounds good

Amanda is South of Columbus between Circleville and Lancastor
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Central Ohio Spring GTG
« Reply #2 on: February 02, 2012, 09:04:22 am »
It's pretty much the center of the state so it's not a bad drive from northern KY ,Indiana,Pa etc .

Geeze Kevin and I went to south Indiana once in a beat up Ranger with a bad tranny and enough saws to make us look like a traveling flea market .

More towards spring woud certainly be better than mid winter especially Ohio winter where the weather can change in half a day .Nice sunny morning then azz deep in snow by 6 PM .Humbug .

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Central Ohio Spring GTG
« Reply #3 on: February 02, 2012, 05:03:41 pm »
Sounds good. I may try to go.
Ron

Offline wkpoor

  • 4 cube
  • **
  • Posts: 61
  • Karma: 2
Re: Central Ohio Spring GTG
« Reply #4 on: February 04, 2012, 12:32:31 am »
Hello guys, I decided to up the ante this year and see if a guy at work can come roast a pig for the meal. No guarantees as its just in the planning stages. Also as before I will have cants milled both 8" and 10".

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Central Ohio Spring GTG
« Reply #5 on: February 04, 2012, 10:54:55 am »
Any ideas on what classes we will be racing?
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22489
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Central Ohio Spring GTG
« Reply #6 on: February 04, 2012, 11:09:43 am »
In the past it was

0-40 or so and  top handles had run in same class at his

0-60 and went to 0-65cc 2010 to let a BB361 in and might need to to let 365's in now. Bill's call.

0-80 or 81

0-100

unlimited

I would  have a bumble bee class for top handles only. Then -0-40 or 42cc for rear handles.  3.1ci 4ci 5ci 6ci unlimited if it were me. Like I said Bill's call.

Would be nice to have enough wood in 8x8 to do 2 cuts this year in the smallest classes up to the 51cc.  2010 up to 51cc was all 1 cut and then 4ci and up was 2 cuts.

REDNECK Saw Repair Getter Done

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Central Ohio Spring GTG
« Reply #7 on: February 04, 2012, 09:29:36 pm »
I haven't been to all of them but as I recall only at TT's and at Pa. did we ever run just a top handle class  .First shot was at TT's there were only a few of us then a lot of others came on board as time progressed .They got faster too .

Ha it's about the only class I do any good at . ;D

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 598
  • Karma: 74
Re: Central Ohio Spring GTG
« Reply #8 on: February 04, 2012, 09:50:10 pm »
if its late enough in the year I would be up for a GTG , just early in the spring I have zero time trying to get everything ready for the start of the racing season and with STS series being early again this year it evens makes it a bit tougher to have everything ready

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22489
  • Karma: 585
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Central Ohio Spring GTG
« Reply #9 on: February 05, 2012, 11:43:02 am »
Bill there is guys on CompetitionSaws and Racesaws that are being updated from your post here. Few are talking of car pooling.
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
165 Views
Last post May 17, 2011, 12:25:31 am
by PNW Saws
0 Replies
18 Views
Last post February 13, 2012, 07:50:02 am
by timber
52 Replies
1583 Views
Last post April 29, 2015, 08:27:11 pm
by Cut4fun .
4 Replies
62 Views
Last post April 08, 2012, 09:18:49 pm
by Cut4fun .
6 Replies
310 Views
Last post October 04, 2012, 01:26:19 pm
by Cut4fun
22 Replies
2015 Views
Last post December 24, 2019, 07:39:58 pm
by pete
29 Replies
203 Views
Last post June 09, 2013, 06:41:08 pm
by Al Smith
2 Replies
28 Views
Last post June 11, 2013, 04:03:26 pm
by Cut4fun .
20 Replies
1186 Views
Last post September 29, 2020, 10:07:34 am
by Cut4fun .
3 Replies
119 Views
Last post November 10, 2015, 11:28:35 am
by dannyupsolate