Author Topic: Husqvarna 50 (Read 16156 times)

3000 FPS · « **Reply #110 on:** May 15, 2020, 09:46:33 pm »

Quote from: Cut4fun . on May 15, 2020, 05:05:04 pm

Looking at the spec sheet in the stickys here. 12,500 is max stock out of cut

I guess I could tune it for some higher RPM's but I think it would start to get lean by then. Maybe with the different cylinder and new piston and ring it could use some breaking in.

Spike60 · « **Reply #111 on:** May 16, 2020, 05:56:30 am »

I'm confused; are both cylinders Mahle or was the one on the saw an aftermarket item? Decos tended to come and go on this family of saws. Seemed kind of random to me. The last remaining OEM cylinder is the 46mm which is made by Husky in Sweden. It does have a deco. There were some Gilardoni jugs in the mix along with the closed port 55's that were Mahles, (I think).

3000 FPS · « **Reply #112 on:** May 16, 2020, 11:33:40 am »

Quote from: Spike60 on May 16, 2020, 05:56:30 am

I'm confused; are both cylinders Mahle or was the one on the saw an aftermarket item? Decos tended to come and go on this family of saws. Seemed kind of random to me. The last remaining OEM cylinder is the 46mm which is made by Husky in Sweden. It does have a deco. There were some Gilardoni jugs in the mix along with the closed port 55's that were Mahles, (I think).

I had a cheapo after market cylinder on the saw and then I found a used OEM cylinder on ebay from a Husq 51. That cylinder turned out to be an exact match to the original one on my Husq 50 special. That is the cylinder in the picture. I then took off the aftermarket cylinder and put the OEM one on the saw. The saw did run better with the OEM.

3000 FPS · « **Reply #113 on:** May 30, 2020, 06:20:43 pm »

The Husqvarna 50 special came a with a two shoe clutch that seemed to slip easily. So I found a 3 shoe clutch on ebay for a 51 or 55 that fit. What a world of difference. I can actually bear down some on the saw now.

Cut4fun . · « **Reply #114 on:** July 13, 2020, 04:34:54 pm »

Husqvarna 50 Special 300th 1989. Seen better days. But not scored, was surprised it wasnt.

Priced it for $60 SOLD

3000 FPS · « **Reply #115 on:** July 13, 2020, 11:35:20 pm »

I have taken the 50 special I rebuilt up to the mountains with me now 3 times and use it for limbing which is where all the cutting really happens. Works out good because of the weight and it always starts easy. Important when you have been cutting all day.

Subject / Started by	Replies	Last post
Husky 266 Started by woodplayer « 1 2 3 4 » Husqvarna	35 Replies 13564 Views	November 23, 2023, 07:45:04 am by Cut4fun .
Husky 556 Started by Spike60 « 1 2 3 » Husqvarna	29 Replies 8173 Views	September 05, 2014, 07:35:49 pm by SawTroll
husky prices down under Started by pete Husqvarna	3 Replies 2008 Views	June 24, 2013, 08:31:57 pm by 660magnum
Husky 55 Closed Port Started by farmboy Husqvarna	4 Replies 3015 Views	July 02, 2013, 09:47:32 pm by farmboy
husky 55 help Started by mrbb « 1 2 » Husqvarna	15 Replies 9363 Views	July 29, 2013, 07:59:33 am by mrbb
HUSKY 394/395 coil Started by turbo885 Wanted	1 Replies 918 Views	July 28, 2013, 08:21:22 pm by Cut4fun .
Husky 575XP vs Husky 288XP Which one would you have in your CAD Stable Started by Cat-Face Timber « 1 2 » Husqvarna	15 Replies 6161 Views	January 23, 2015, 02:03:24 pm by Bluegill
Husky 135 40cc Started by farmboy Husqvarna	1 Replies 2042 Views	February 03, 2018, 07:42:16 am by Cut4fun .
husky 570 starts but bogs bad Started by joel4bs Husqvarna	4 Replies 3058 Views	March 30, 2018, 10:35:37 am by joel4bs
Husky 44 Started by leec Husqvarna	2 Replies 2336 Views	April 27, 2018, 08:04:59 pm by leec

Chainsaw Repair

News:

Author Topic: Husqvarna 50 (Read 16156 times)

3000 FPS

Re: Husqvarna 50

Spike60

Re: Husqvarna 50

3000 FPS

Re: Husqvarna 50

3000 FPS

Re: Husqvarna 50

Cut4fun .

Re: Husqvarna 50 Special 300th

3000 FPS

Re: Husqvarna 50

Related Topics