Chainsaw Repair

husky 66 and husky 372

jr32560
Today, 10:03 AM

need new bars for both saws am seeing a 050 and 058 gauge--have used 050 on the 66 for years-the 372 is new to me no bar---- any help would be great--got to tune the 372 ans adjust carb guy dropped it off said I could have it --great friend
want to stay with what the 372 used prior as to not upset the sprocket on clutch --may need new ones on both saws havent changed to one on 66 in many years-and the 372 was just dropped off this week-the 66 has inbound sprocket the other has the outbound sprocket---I know the 058 is a stronger chain but always used 050 cause it is available local--- any advise??


Me cut4fun The above was sent to me by a unknown source somehow. So will post here with the name.  Rim could use 050 058 063. So no biggie there.  I would use 050 myself.

thanks for the info--been searching the internet for deals on a pair of bars for these saws--want a 20" for the 66 and a 24" for the 372 -they keep asking if it's the 050 or 058--as far as I know 050 was what I used for years-always best to check with others before making a costly mistake--love this forum

Doesn't matter whether you run .050 or .058 if you are buying chains to match. Husqvarna Canada usually supplies .058 unless the customer specifies otherwise. As HolmenTree says you can use Stihl bars with spacers if they are more readily available.