Author Topic: Another 4 stroke trimmer.  (Read 1428 times)

0 Members and 39 Guests are viewing this topic.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Another 4 stroke trimmer.
« on: May 14, 2016, 08:39:01 pm »
So I have another Troy built 4 stroke trimmer and yes it is another freeby.   
The carb on this is Walbro WYL 187.   
So instead of rebuilding the carb I decided to try one of those Chinese knock offs. a Ruixing.

The carb was very cheap as in not much money.   I put it on and the trimmer starts up real good and idles good and run at half throttle real good.
Go to full throttle and it dies.   I try adjusting it but no good.

So I take the carb apart and find the main jet and I have these very small drills that I used for watch making.   I drill the main jet out and put it all
back together.   Bingo got wide open throttle now.    Trimmer idles good and accelerates good.    Just passing along some info.
PP 505, 475, 445.

Share on Facebook Share on Twitter

Like Like x 2 View List

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Another 4 stroke trimmer.
« Reply #1 on: May 14, 2016, 09:08:44 pm »
GTK
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 328
  • Karma: 28

  • Total Badges: 18
    Badges: (View All)
    Third year Anniversary Karma Good Level 4 Second year Anniversary Poll Voter One year Anniversary
Re: Another 4 stroke trimmer.
« Reply #2 on: May 15, 2016, 01:02:44 pm »
good to hear someone  is smart enough to get one to run. please come to alabama and fix my six ;D
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Another 4 stroke trimmer.
« Reply #3 on: May 15, 2016, 01:41:14 pm »
Nice fix Roger. 

Still only 4 stroke trimmer I had come in was a guy running 2 stroke mix in it.  He gave it to me free.  Changed plug, flushed it good and gave his trimmer back.
Told him what he was doing to make it not run.
Like Like x 1 View List

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 328
  • Karma: 28

  • Total Badges: 18
    Badges: (View All)
    Third year Anniversary Karma Good Level 4 Second year Anniversary Poll Voter One year Anniversary
Re: Another 4 stroke trimmer.
« Reply #4 on: May 31, 2016, 06:19:19 pm »
anyone rebuilt the wyl carburetor did it turn out ok.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Another 4 stroke trimmer.
« Reply #5 on: June 01, 2016, 05:39:02 am »
anyone rebuilt the wyl carburetor did it turn out ok.

I have rebuilt a few of the WYL series Walbro carbs with no problems.   The diaphragms get stiff in them just like any other carb.
PP 505, 475, 445.

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 328
  • Karma: 28

  • Total Badges: 18
    Badges: (View All)
    Third year Anniversary Karma Good Level 4 Second year Anniversary Poll Voter One year Anniversary
Re: Another 4 stroke trimmer.
« Reply #6 on: June 01, 2016, 05:23:11 pm »
was wrong thought wyl and wyla used same kit. k1wyla is kit for wyla. cheapest i found is 10 bucks shipped for 1 maybe they will combine shipping for 6. good to hear they rebuild ok.

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Another 4 stroke trimmer.
« Reply #7 on: June 02, 2016, 02:13:44 am »
When rebuilding those carbs just be careful with the main jet where the plastic needle comes down into it.    That little brass jet has a tiny o-ring on it that is used to seal it from leaking fuel.    Some kits come with that o-ring so that you can replace it.   Just make sure the jet is seated all the way down if you take it out and replace that o-ring and make sure the hole in it is clean.
PP 505, 475, 445.

Offline dannyupsolate

  • Piped Saw
  • *****
  • Posts: 328
  • Karma: 28

  • Total Badges: 18
    Badges: (View All)
    Third year Anniversary Karma Good Level 4 Second year Anniversary Poll Voter One year Anniversary
Re: Another 4 stroke trimmer.
« Reply #8 on: June 02, 2016, 06:35:09 pm »
ordered 6 k1wyla  walbro kits from mowers4u on ebay 28 bucks shipping and all. These are not available aftermarket. fits some 4 cycle trimmers and mini tillers mtd/ryobi family.
Like Like x 1 View List

Offline Chris-PA

  • 6 cube
  • ****
  • Posts: 209
  • Karma: 32

  • Total Badges: 21
    Badges: (View All)
    Level 5 Third year Anniversary Second year Anniversary 100 Posts 50 Posts Level 4
Re: Another 4 stroke trimmer.
« Reply #9 on: June 03, 2016, 09:10:04 pm »
How are these Troy Bilt 4-strokes?  They are rather appealing to me and I might go that way if I get another trimmer.

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
627 Views
Last post April 13, 2012, 04:19:50 pm
by Cut4fun .
36 Replies
2328 Views
Last post May 23, 2015, 04:56:10 pm
by 660magnum
5 Replies
856 Views
Last post June 29, 2013, 02:03:10 pm
by RoyM
16 Replies
1064 Views
Last post August 20, 2014, 08:56:19 am
by Al Smith
0 Replies
426 Views
Last post October 12, 2015, 03:32:41 pm
by dannyupsolate
5 Replies
695 Views
Last post December 07, 2015, 02:38:42 pm
by dannyupsolate
0 Replies
212 Views
Last post February 26, 2018, 09:02:23 am
by Cut4fun .
0 Replies
224 Views
Last post May 06, 2018, 11:33:11 am
by Cut4fun .
3 Replies
417 Views
Last post July 01, 2019, 12:47:31 pm
by The Ripper
4 Replies
1089 Views
Last post July 18, 2019, 07:12:24 am
by blackoak